Printable View
i'm from india too, thought i have already given, anyway here are the files you need
MAIN : W810_R4EK001_MAIN_GENERIC_HN_RED49
FS : W810_R4EK001_FS_AMERICA_2_RED49
custpack : W810_CDA102555_107_R2A_Generic_AMERICA_2
you can use if you ought to upgrade, it's the only upgrade for CID49 but if you like stick it with the current version, use these
MAIN : W810_R4EA031_MAIN_GENERIC_HN_RED49
FS : W810_R4ED001_FS_S_ASIA_LEVAN_RED49
custpack : W810_CDA102555_110_R2A_Generic_S_ASIA_LEVAN
Hello there. Im using w300i. where do i get the firmware to browse it, at step 3.2?
look at the top of this page, you'll find downloads
Sorry for double post, but help me please :(
I can't find the cda and and region that i need. I have many there but not mine. I see it on the list that was posted on the thread, but on on xs++ :(
My K790i suddenly turned off and was not turning on. When I tried to start the phone it came up to the start animation then the screen kept blinking white/ black. I tried SE update service but since I had latest firmware it did not flash the phone.
Finally I used XS++ 3.1 (BTW big thanks for the software and this guide) to flash the latest firmware again. The phone started working but now after a few weeks it has again turned off and is not starting.
What could be the problem with the phone?
used xs++ on two k800i one for screen of death and yesterday for a k800i which would not ring anymore. Upgraded the last one from red 49 to red 52 and then flashed on both occasions worked great.
thanks for your help.
thnksssssssss
After performing a (K610_R1GB001_FS_EUROPE_5_RED51) flash using XS++
And a interruption from a power failure right at the worst time.
I read the Guideline from mohdumer...
It would seem that there is no recovery from a "bad" main/file system firmware flash
All I get is this response now...
08:08:21| XS++ v3.2 Dev1 (Crystal) Ready !08:08:21| Executed on Microsoft Windows XP08:08:55| 08:08:55| Attempting to open the interface...08:08:55| 08:08:55| TURN OFF PHONE!08:08:55| Hold 'C' button on phone and connect phone NOW.08:08:55| You have 30 seconds...08:08:55| 08:09:26| Error: Cannot open phone communication port08:09:28| Disconnected... Unplug the phone08:59:50| XS++ v3.2 Dev1 (Crystal) Ready !
08:59:50| Executed on Microsoft Windows XP
09:00:06| Attempting to open the interface...
09:00:06| TURN OFF PHONE!
09:00:06| Hold 'C' button on phone and connect phone NOW.
09:00:06| You have 30 seconds...
09:00:37| Error: Cannot open phone communication port
09:00:39| Disconnected... Unplug the phone
09:01:13| Shutting down...
In UR Opinion is there any hope or RIP?
Appreciated reply
Try to check your cable first. If that ok, you can try to take out your batteray for at least minutes, before you insert again. Sometimes (a lot at mine), works perfectly. It cause by uncompleted flash for instance. Hope it help.
Note to anyone having problems with a dead phone Refer to (and I mean totally dead. No response or blinking light)
Refer to Senter adviceThread "Totally dead K800i"
Top Sony Forums - View Profile: senter
I had a brick and this advice returned my K610i back to the living
You must have latest Setool lite and XS++ installed.
wat pack shall i use for k310i
i wanna chage my phone to w800i can i do this
try a fully charged battery and check if the usb flash driver is corrupt or not, try changing the usb portQuote:
Originally Posted by burgers
what phone do you have?Quote:
Originally Posted by chandu3945 View Post
i wanna chage my phone to w800i can i do this
Hi there, I'm trying to debrand a w850i that I had on contract from Three in the UK. Its now unlocked (code supplied by Three) and I'm trying to debrand it so my girlfriend can use it on the Orange network in the UK. What firmware do I need? and do i need anything else?
Here is a copy of the log file
19:14:20| Baseband ID: 9900
19:14:20| Protocol Version: 3.1
19:14:20| Phone name detected!
19:14:20|
19:14:20| Profiling SEMC phone...
19:14:20| Platform: DB2020
19:14:20| OTP CID: 49
19:14:20| EROM CID: 52
19:14:20| EROM Color: Red
19:14:20| IMEI: 35240101xxxxxx
19:14:20| Phone ID: W850
19:14:20| Region: HUTCH_1
19:14:20| CDA: CDA102677/2 R5A
19:14:20| Firmware Version: R1EJ001
19:14:20| EROM: R3A016
Thanks in advance :)
i have k310i
can i increse my phone memory by changing software
i have k310i model
did you say it is unlock through code? well if it is, then you don't have to worry , just put the sim card and use itQuote:
Originally Posted by tricksterd
there is no way you can do to increase phone memoryQuote:
Originally Posted by chandu3945 View Post
can i increse my phone memory by changing software
i have k310i model
Hi, thanks for the reply. We're already using the Orange sim card in it. What I'd like to do is debrand it now, ie Take out all the stuff that Three put in it. Basically, I'm trying to find out which FS and main files I can use so the phone is just a standard W850i that isn't branded to any company.Quote:
Originally Posted by riders4sia
Thanks :)
well then, use these files from topsony download area :
W850_R1KG001_MAIN_GENERIC_CY_RED52
W850_R1KG001_FS_S_ASIA_LEVAN_RED52
HB1-06_Gen_CDA102568_110_R5A_GENERIC_S_ASIA_LEVAN
how to instal walkman skin in w880i .in tpa\preset\system\multimedia\
your skin should go to tpa/system/multimedia/mp/skin
sorry i'm a new bird here, where to get to flash file
download area
great job!!!
thanks so much for this thread
I have a problem with mine... it always says my phone is not supported.. how do i fix that?
you have that problem because your phone is CID53 phone and xs does not support CID53 phone. Read here on how to flash CID53 phone: Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony ForumsQuote:
Originally Posted by kamyl11
if you could show us the log from xs, it will be helpful to choose firmware for your phone
i am having k310i
i wanna change to w200i is that possible by flash?
if possible what software shall i keep in my phone can any one help me?
thanks
i am having k310i
i wanna change to w200i is that possible by flash?
if possible what software shall i keep in my phone and will the internal memory expand can any one help me?
thanks in advance
is it safe to do all this thing??
my hp is k800 n i scared when i do all this thing it will damage my phone....
sry 4 my english
if it has a cid 52 or less make a gdfs back up b4 u start
can i crossflash my Z555i to W380 with XS++ 3.1?
I would like to view/input Simplified Chinese on my w580i. Any suggestion would be greatly appreciated.
19:42:02| Platform: DB2020
19:42:02| OTP CID: 51
19:42:02| EROM CID: 52
19:42:02| EROM Color: Red
19:42:02| IMEI: 01127100xxxxxx
19:42:02| Phone ID: W580
19:42:02| Region: CINGULAR
19:42:02| CDA: CDA102774/102 R25A
19:42:02| Firmware Version: R8BE001
19:42:02| EROM: R3A022
Ok Dear I know But but I want to know what is other Possibilities of Flashing K550i with How many number of Mobile Set Pls Help me in this this regards....i mean I have K550i and i want to flash our Mobile with Other Possible mobile set of SE Except W610 Because i have already done flashing with W610 Pls help......:confused:
there is no other compatible phone with K550 other than W610Quote:
Originally Posted by Adeel Khan
Anyone know whether APAC contain both simplied & tranditional Chinese? In the language page it just say Chinese. Is it possible to display both on w480i? I went through all the posts on this thread and found them very helpful. But I am still a little uncertain about which set of files I should use. Should I use these files:
W580_R8BA024_MAIN_CHINA_LA_RED52
W580_R8BA024_FS_CHINA_RED52
HB1-06_Gen_CDA102568_108_R8A_GENERIC_CHINA
or should I use some of the newer ones, such as R8BE001, RED53. Is it a good idea to go to RED53? But some of files do not have matching pairs. I can't find these file anywhere for example:
W580_R8BE001_FS_CHINA_RED52 or
W580_R8BE001_FS_CHINA_RED53
I would like to read/write simplified Chinese and hopeful can read tranditional Chinese as well on my w580i. Please let me know which files I should use to flash my phone, thanks!
19:42:02| Platform: DB2020
19:42:02| OTP CID: 51
19:42:02| EROM CID: 52
19:42:02| EROM Color: Red
19:42:02| IMEI: 01127100xxxxxx
19:42:02| Phone ID: W580
19:42:02| Region: CINGULAR
19:42:02| CDA: CDA102774/102 R25A
19:42:02| Firmware Version: R8BE001
19:42:02| EROM: R3A022
as u only have a cid 52 phone u will have to stick with cid 52 files less u upgard ur cid to 53 but then u will hae to use jd flasher to flashs ur phone and it may get sim locked if it was only patch unlocked :-(
philzfog, thanks for the advice! I guess I will stay with cid 52.
Any suggestions on the set of files I should use?
Anyone has done this and worked?
use these files,
MAIN : W580_R8BA024_MAIN_CHINA_LA_RED52
FS : W580_R8BE001_FS_CHINA_RED52
custpack : HB1-06_Gen_CDA102568_108_R8A_GENERIC_CHINA
Thanks riders4sia for the advice. I noticed that the MAIN is R8BA024 and the FS is R8BE001. Is it ok if these two are different?Quote:
Originally Posted by riders4sia
Use this:
W580_R8BA024_MAIN_CHINA_LA_RED52
W580_R8BA024_FS_CHINA_RED52
HB1-06_Gen_CDA102568_108_R8A_GENERIC_CHINA
They should be from the same firmware.
Have a nice day
Very helpful articles.:)
thanks man really worked for me and many others keep it up guys
This tutorial is great. Successfully flashed w580i :D