AudioPhile Premium XT WBXML Acoustics for DB3210 / DB3150 phones

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with headphones through fastport (not 3.5mm jack) in Media Player.

Notes before read further:
* Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980

This acoustics is compatible for ALL A2 DB3210 and DB3150 phones which is using wbxml accoustics. Other phones that utilize ZAPF and APF is not supported.
Attention: K850, W910 and K660 doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only PHF and customize.xml files with a consequences of sacrificed / disappointing audio quality :)

Main Features for Version 0.9.1 Beta:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume, even with Mega Bass.
- Increased Dynamic Range for about 6dB, depends on your acoustic selection, headphones, and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening (or Clear Stereo for a phones that has Clear Audio Experience).
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean loudness).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the attachment
- Pay an attention to "README.txt" carefully. If you already read this post carefully, move to next step
- Read some txt and pictures if exist in the folder of your acoustic selection. They are important
- Select upload - *.zip from your desired acoustic type
- Open A2Uploader. In MISC files, click browse button and point it to upload - *.zip
- Press FLASH button. Turn off your phone, hold C and connect it. The flashing process only takes 10 seconds
- Turn on the phone. When playing the music, switch to MANUAL equalizer.

Install Attention:
- For phones that has Clear Audio Experience, DO NOT UPLOAD customize_upgrade.xml! Modify upload - *.zip then only upload manually the PHF and CSV files via "FileSystem Tool"! Use your desired equalizer :)
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you will face the consequences :p

There are three types of acoustic. I highly recommend to try number 1 first. If you like it, you may experimenting by trying number 2 or 3.
For people who likes to hear a music with aggressive attack (such as rock, pop, dance and techno), you may like number 2, with some sacrifice regarding dynamic range and clarity.

Here it is. Your judgement may differs:

1. FLAT
- Recommended to try this first
- Flat Frequency Response

2. AGGRESSIVE
- You likes to hear a music with aggressive attack (such as rock, pop, dance and techno)? You didn't care about the dynamic range stuff? This is the right acoustic
- The DRC algorithm is modified to increase attack and release time. You may hear some sign of frequency hard cuts, but with pleasant listening experience. Try it yourself!
- Aggressive and Punchy Attacks in all frequencies range (low, mid and high)
- May cause ears fatigue after long listening session (compared with FLAT acoustics.) Use with caution.

You are using FLAT or AGGRESSIVE, and want to adjust the manual equalizer? Please DO NOT make any change in the first bar of manual equalizer.
The first bar has been modified to amplify low frequencies to +14dB, a value that is normally not allowed in Manual Equalizer which is limited to +8dB.
If you accidentaly lowered it, just reupload customize_upgrade.xml (located in zip file), or flash with upload -*.zip.
To make it clearer, please look at pictures below:

http://i27.tinypic.com/elckno.jpg

3. DRC OFF
- Dynamic range of audio signal is not supressed and remains original. Reveals full potential of high-bitrate audio files. Highest clarity among all other two acoustics
- Flat Frequency Response
- May cause ears fatigue after long listening session (compared with FLAT acoustics.) Use with caution
- DO NOT modify all of the 5-bar equalizer values. Modify it will make manual equalizer sounds weird.
If you want to do that, you must reset it first by upload customize.xml that is located in "Reset Manual Equalizer" to tpa/preset/custom.

There's ONE MAJOR DRAWBACK for this DRC OFF acoustics that ONLY happened when you want to modify manual equalizer.

Here is the main drawback: raising or amplify your equalizer above 1 dB / 1 bar will makes the sound distorted since the sound signal was kept as it is. To make it clearer look at picture below:

http://i32.tinypic.com/ezq1s4.jpg

"The Solution": Decrease the other frequencies instead of raising one frequencies.

To explain it further, let's take an example from 5-band equalizer in a phone that doesn't has Clear Audio Experience.
If you usually modify it like this: | +5 | +2 | -1 | 0 | +3 |

Then adjust all values so it doesn't exceed 0 dB by subtracting all values with the highest value (in this case 5). This is how it would looks: | 0 | -3 | -6 | -5 | -2 |
Sounds quiet? Raise the volume. It would not degrade the sound quality.

By default, manual equalizer only allows maximum adjustment of 8 bar (8dB). If you want to adjust it more, you can use customize_upgrade.xml tricks.

Open customize_upgrade.xml in "Reset Manual Equalizer" folder by using notepad, and modify the value as you desired.
Max permitted adjustment is +/- 15 dB. Value above it will be ignored. I said it again: do not set it above 0 dB to prevent distortion.
Please follow the roles of "The Solution" when adjusting equalizer to prevent degraded audio quality.

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify *csv files
- number1, for his stunning amplifier algorithm
- Rodriguez, for his amazing acoustic works that inspiring me to starts modifying acoustic
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (all of you know the reasons :p )
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

| Download Here |

| Original Source |


Hiron

I can't edit the first post, so here it is:

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, Z770, K630 and K660
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210 and DB3150 phones which is using wbxml accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Maybe later when I'm in a mood, I can make a version without *.csv for first generation A2 Phones, although I can't guarantee the quality since it doesn't has csv files.

Main Features for Version 1.1:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range for about 6dB, depends on your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.

Changelog:

1.1 (28-08-2009)
- Modifying the help files
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble
- Modifying the help files

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF
- Modifying the help files

0.9.2 Beta (25-08-2009):
- Modifying the help files. No need to reupload the acoustic :)

0.9.1 Beta (24-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- There are two types of csv in "csv to tpa-preset-acoustic" folder. Select one and upload to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones
- Upload the entire content of "wbxml to ifs-settings-acoustic". If your phone is not W995, do not upload phf_jack_play.wbxml
- Upload customize_upgrade.xml in "xml to tpa-preset-custom" folder to tpa/preset/custom. If your phone has Clear Audio Experience or you use csv number two, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. For in-ear-canal handsfree, use Bass. You can customize manual equalizer as you wish

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

There are two types of csv files. Upload only one of them.

1. eq max 15dB - normal quality
- Recommended to try this first. I usually listen at 2-3 bar (maximum volume is 8 bar)

2. eq max 6dB - higher quality - 6dB louder than csv #1
- Do you feel that the first csv is quiet and not powerful, even after the volume is already 8 bar? Try this, because you may destined to has iron ears
- Higher clarity and dynamic range
- 6dB louder than first csv
- Maximum equalizer value is +/- 6dB (6bar.) Value outside this value range would be ignored and set to +/-6dB instead.
- May cause ears fatigue after long listening session (compared with first csv.) Use with caution

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "xml to tpa-preset-custom" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 5 |

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-15dB will not work. For example, 17dB value will be ignored. +/-15dB would be set instead.

Q: I use csv number two. May I upload customize_upgrade.xml?
A: If your phone doesn't has Clear Audio, you may upload it. But MegaBass and Manual preset that amplify each 63Hz frequency to 15dB and 14dB will be ignored. 6dB value will used instead.

Q: I want to edit more than 15dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:

http://i27.tinypic.com/elckno.jpg

It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- Rodriguez, for his amazing acoustic works that inspiring me to starts modifying acoustic
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||

|| Download Old Version (0.9.3b) Here ||



Hiron

Latest Update:

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, W890, Z770, K630 and K660
- Example of UIQ3 phones: P1, P990, P900, M600 W950 and W960
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210 and DB3150 phones which is using wbxml accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Maybe later when I'm in a mood, I can make a version without *.csv for first generation A2 Phones, although I can't guarantee the quality since it doesn't has csv files.

Main Features for Version 1.7:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range for about 7dB - 15dB, depends on acoustic selection, your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.

Changelog:

1.7 (31-08-2009)
- Modifying the help files
- csv is 1dB louder and dynamic range increased
- Added support for UIQ3 phones

1.6 (30-08-2009)
- Modifying the help files
- Renaming Crystallizer Boom to Clear Crystallizer
- Adding Bomb Crystallizer wbxml with maintained bass, attack and treble with aggressive style.

1.5 (29-08-2009)
- Modifying the help files
- Adding Crystallizer Boom wbxml with maintained attack, treble and clarity.

1.1 (28-08-2009)
- Modifying the help files
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble
- Modifying the help files

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF
- Modifying the help files

0.9.2 Beta (25-08-2009):
- Modifying the help files. No need to reupload the acoustic :)

0.9.1 Beta (24-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- There are two types of csv in "csv to tpa-preset-acoustic" folder. Select one and upload to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones or UIQ3
- There are three types of wbxml in "wbxml to ifs-settings-acoustic" folder. Select one and upload to ifs/settings/acoustic. If your phone is not W995, do not upload phf_jack_play.wbxml
- Upload customize_upgrade.xml in "xml to tpa-preset-custom" folder to tpa/preset/custom. If your phone has Clear Audio Experience or it was UIQ3 or you use csv number two, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. For in-ear-canal handsfree, use Bass. You can customize manual equalizer as you wish

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

There are three types of wbxml files. Upload only one of them.
1. Flat
- The title described itself. Most neutral acoustic.

2. Clear Crystallizer
- Maintained attack, treble and clarity.

3. Bomb Crystallizer
- Maintained bass, attack and treble with aggressive style.

There are two types of csv files. Upload only one of them.

1. eq max 14dB - recommended to try this first
- Recommended to try this first. I usually listen at 2-3 bar (maximum volume is 8 bar)

2. eq max 6dB - louder than csv #1 - megabass is only bass+
- Do you feel that the first csv is quiet and not powerful, even after the volume is already 8 bar? Try this, because you may destined to has iron ears
- MegaBass which amplify 63Hz frequencies to +14dB become only +6dB with this csv
- Higher clarity and dynamic range
- 9dB louder than first csv
- Maximum equalizer value is +/- 6dB (6bar.) Value outside this value range would be ignored and set to +/-6dB instead.
- May cause ears fatigue after long listening session (compared with first csv.) Use with caution

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Q: I have UIQ3 phones. How to use this acoustic?
A: Don't upload csv and customize_upgrade.xml. Just open "wbxml to ifs-settings-acoustic" folder, choose your acoustic, and rename *.wbxml to *.aat. Upload it to your phones.
It's not necessary to upload phf_3_play.aat and phf_jack_play.aat

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "xml to tpa-preset-custom" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 5 |

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-14dB will not work. For example, 17dB value will be ignored. +/-14dB would be set instead.

Q: I use csv number two. May I upload customize_upgrade.xml?
A: If your phone doesn't has Clear Audio, you may upload it. But MegaBass and Manual preset that amplify 63Hz frequency to 14dB will be ignored. 6dB value will used instead.

Q: I want to edit more than 14dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:

http://i27.tinypic.com/elckno.jpg

It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- Rodriguez, for his amazing acoustic works that inspiring me to starts modifying acoustic
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||



Hiron

working on w810i?Lock nice :)

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) and UIQ3 Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, W890, Z770, K630 and K660
- Example of UIQ3 phones: P1, P990, P900, M600 W950 and W960
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210, DB3150 and UIQ3 phones which is using wbxml or aat accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Main Features:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range, depends on acoustic selection, your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.
- Enjoy enhanced Clear Bass in a phone without Clear Audio Experience.

Changelog:

3.0 (03-09-2009)
- Modifying the help files
- 1. Flat is rewritten to 2. Loud. Much clearer with best loudness. May sound different in 3.5mm jack
- 2. Clear Crytallizer is rewritten to 1. Clear. Adding a little bass. Best clarity
- 3. Dynamite Crystallizer is rewritten to 3. Bass. Reduced distortion. Best bass and good for rock and house music

2.0 (02-09-2009)
- Modifying the help files
- Bomb Crystallizer removed
- Dynamite Crystallizer added. Loud (compared to Flat and Clear). Better midrange, enhanced bass and aggressive style with little distortion. May sound different in 3.5mm jack. Must try!

1.8 (01-09-2009)
- Modifying the help files
- Warmer sound and Clear Bass experience with increased clarity
- Now the acoustic becomes more compatible with A2 first generation phones
- Unneeded csv and wbxml was no longer available
- Sound frequency was equalized from wbxml itself so it's not necessary again to upload customize_upgrade.xml. Try MegaBass equalizer

1.7 (31-08-2009)
- Modifying the help files
- csv is 1dB louder and dynamic range increased
- Added support for UIQ3 phones

1.6 (30-08-2009)
- Modifying the help files
- Renaming Crystallizer Boom to Clear Crystallizer
- Adding Bomb Crystallizer wbxml with maintained bass, attack and treble with aggressive style.

1.5 (29-08-2009)
- Modifying the help files
- Adding Crystallizer Boom wbxml with maintained attack, treble and clarity.

1.1 (28-08-2009)
- Modifying the help files
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble
- Modifying the help files

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF
- Modifying the help files

0.9.2 Beta (25-08-2009):
- Modifying the help files. No need to reupload the acoustic :)

0.9.1 Beta (24-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- Upload csv files in "csv to tpa-preset-acoustic" folder to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones or UIQ3
- There are three types of wbxml, so just choose only one. Upload wbxml files in "wbxml to ifs-settings-acoustic" folder to ifs/settings/acoustic. If your phone is not W995, do not upload phf_jack_play.wbxml
- It's not necessary to upload customize_upgrade.xml in "xml to tpa-preset-custom" folder to tpa/preset/custom. Read further for more information. If your phone has Clear Audio Experience or it was UIQ3, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. You can customize manual equalizer as you wish.

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

There are three types of wbxml files. Upload only one of them.
1. Clear
- Best clarity

2. Loud
- Best loudness

3. Bass
- Best bass

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Q: I have UIQ3 phones. How to use this acoustic?
A: Don't upload csv and customize_upgrade.xml. Just open "wbxml to ifs-settings-acoustic" folder, choose your acoustic, and rename *.wbxml to *.aat. Upload it to your phones.
It's not necessary to upload phf_3_play.aat and phf_jack_play.aat

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "xml to tpa-preset-custom" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 3 |. It's the same value as MegaBass, but now you can customize it furthermore.

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-15dB will not work. For example, 17dB value will be ignored. +/-15dB would be set instead.

Q: I want to edit more than 15dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:

http://i27.tinypic.com/elckno.jpg

It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||



Hiron

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) and UIQ3 Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree and line out through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, W890, Z770, K630 and K660
- Example of UIQ3 phones: P1, P990, P900, M600 W950 and W960
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210, DB3150 and UIQ3 phones which is using wbxml or aat accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Main Features:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range, depends on acoustic selection, your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.
- Enjoy enhanced Clear Bass in a phone without Clear Audio Experience.

Changelog:

5.3 (06-05-2009)
- ClosedAir wbxml is modified. Better and clearer sound compared with ClosedAir v5.0!
- csv gets even much more louder than v5.0. It was about 15dB louder! For W995 user, the volume only differs in fastport, not 3.5mm jack... Try fastport, it's much more louder! But it's a bad news for a phone withouth csv...
- Fixed Bug: MH-700, a 3.5mm jack headset that has line out and line in (mic) had right channel duplicated from left, which make it sounds mono. My mistake in wbxml (HK BEARNADD). Fixed and thanks to idumbakumar for reporting
- wbxml option becomes simplified. You'll know what I mean later when downloading
- Modifying the help files
- Reconsolidating some folder

5.0 (05-09-2009)
- Modifying the help files
- Adding folder "3. optional - choose only one\vkp patching to remove (+8) and (-8) manual eq limitation" Read further for more details.
- Only for csv users. Csv is changed. Better clarity and much louder volume. By using this csv, it can be claimed that this is one of the loudest acoustics in A2 wbxml modding world *

* Power output from phone circuit has been set as high as possible while still keeping a sounds without distortion at max bar with MegaBass eq.
Original csv only render MegaBass useless at max bar (the preset goes down from 14 0 0 0 3 to 6 0 0 0 3), which is not the case with this csv.
If the sound is distorted, then it is your hardware (headphone) limitation. Buy high quality headphone such as Audio Technica ATH-AD2000 or Grado GS1000i. Each of them are worth about a thousand dollar :D

4.0 (04-09-2009)
- Adding line_out support (such as MMC-60 accessories)
- Modifying the help files
- 3. Bass is rewritten to 1. ClosedAir. Better soundstaging while still keeping its aggressive style. Best for rock, pop or other Bassy music
- 2. Loud is rewritten to 2. OpenAir. Better soundstaging and louder while still keeping its natural style. Best for jazz, live or other instrumental music
- 1. Clear is merged into 2. OpenAir
- Now all the wbxml doesn't depend on the csv. You may use original csv to get much louder volume but with little sacrifice in quality
- Little changes in csv and customize_upgrade.xml

3.0 (03-09-2009)
- Modifying the help files
- 1. Flat is rewritten to 2. Loud. Much clearer with best loudness. May sound different in 3.5mm jack
- 2. Clear Crytallizer is rewritten to 1. Clear. Adding a little bass. Best clarity
- 3. Dynamite Crystallizer is rewritten to 3. Bass. Reduced distortion. Best bass and good for rock and house music

2.0 (02-09-2009)
- Modifying the help files
- Bomb Crystallizer removed
- Dynamite Crystallizer added. Loud (compared to Flat and Clear). Better midrange, enhanced bass and aggressive style with little distortion. May sound different in 3.5mm jack. Must try!

1.8 (01-09-2009)
- Modifying the help files
- Warmer sound and Clear Bass experience with increased clarity
- Now the acoustic becomes more compatible with A2 first generation phones
- Unneeded csv and wbxml was no longer available
- Sound frequency was equalized from wbxml itself so it's not necessary again to upload customize_upgrade.xml. Try MegaBass equalizer

1.7 (31-08-2009)
- Modifying the help files
- csv is 1dB louder and dynamic range increased
- Added support for UIQ3 phones

1.6 (30-08-2009)
- Modifying the help files
- Renaming Crystallizer Boom to Clear Crystallizer
- Adding Bomb Crystallizer wbxml with maintained bass, attack and treble with aggressive style.

1.5 (29-08-2009)
- Modifying the help files
- Adding Crystallizer Boom wbxml with maintained attack, treble and clarity.

1.1 (28-08-2009)
- Modifying the help files
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble
- Modifying the help files

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF
- Modifying the help files

0.9.2 Beta (25-08-2009):
- Modifying the help files. No need to reupload the acoustic :)

0.9.1 Beta (24-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- Upload csv files in "csv to tpa-preset-acoustic, not for A2v1 or UIQ" folder to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones or UIQ3
- There are two types of wbxml, so just choose only one. Upload wbxml files in "wbxml to ifs-settings-acoustic" folder to ifs/settings/acoustic. If your phone is not W995, do not upload phf_jack_play.wbxml
- It's not necessary to upload customize_upgrade.xml in "3. optional - choose only one\xml to tpa-preset-custom, not for Clear Audio or UIQ" folder to tpa/preset/custom. Read further for more information. If your phone has Clear Audio Experience or it was UIQ3, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. You can customize manual equalizer as you wish.

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

There are two types of wbxml files. Upload only one of them.
1. ClosedAir
Feel different soundstaging like hearing with ClosedAir headphones. Aggressive style and quieter when compared with OpenAir. Best for rock, pop or other Bassy music

2. OpenAir
Feel different soundstaging like hearing with OpenAir headphones. Natural style and louder when compared with ClosedAir. Best for jazz, live or other instrumental music

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Q: I have UIQ3 phones. How to use this acoustic?
A: Don't upload csv and customize_upgrade.xml. Just open "wbxml to ifs-settings-acoustic" folder, choose your acoustic, and rename *.wbxml to *.aat. Upload it to your phones.
It's not necessary to upload phf_3_play.aat and phf_jack_play.aat

Q: What is "3. optional - choose only one\vkp patching to remove (+8) and (-8) manual eq limitation" folder?
A: By applying these patch, you will theoritically more extreme manual equalizer. +-8 bar limitation becomes +-14 bar

Q: How to apply that?
A: Read || here || for more information

Q: I didn't see my phones mentioned in this folder. Where is mine?
A: In this folder, these are some of the patch that I can find by googling. You can port the patch to your phone.

Q: How to port the patch?
A: Read || here || for more information

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "3. optional - choose only one\xml to tpa-preset-custom, not for Clear Audio or UIQ" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 5 |. MegaBass value is | +14 | 0 | 0 | 0 | 3 |, and now you can customize it furthermore.

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-14dB will not work. For example, 17dB value will be ignored. +/-14dB would be set instead.

Q: I want to edit more than 14dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:

http://i27.tinypic.com/elckno.jpg

It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||



Hiron

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) and UIQ3 Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree and line out through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, W890, Z770, K630 and K660
- Example of UIQ3 phones: P1, P990, P900, M600 W950 and W960
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210, DB3150 and UIQ3 phones which is using wbxml or aat accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Main Features:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range, depends on acoustic selection, your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.
- Enjoy enhanced Clear Bass in a phone without Clear Audio Experience.

Changelog:
6.1 (10-09-2009)
- Bug fixed: I made a mistake when rewriting a wbxml that makes the sound comes too powerful.. Now it had been normalized
- Csv is one again

6.0 (09-09-2009)
- Csv is changed
- Wbxml name is changed: Crystallity Booster and All Round Booster. The goal of this v6.0 is to minimizing sound noise as much as possible while still providing detailed and clean sound with amazing soundstaging...
Recommended to try Crystallity Booster at first. Colder csv is provided for In-Ear headphone that has a muffled sound such as HPM-64 and HPM-77... Warmer csv is here for higher-quality headphone, but you may figure it yourself which is better :)

5.6 (08-09-2009)
- Someone says that he prefer colder version rather than warmer version. So I make two selection of csv. Only for csv user

5.5 (07-09-2009)
- Little changes in wbxml and equalizing changes in csv. More warmer and natural sound

5.3 (06-09-2009)
- ClosedAir wbxml is modified. Better and clearer sound compared with ClosedAir v5.0!
- csv gets even much more louder than v5.0. It was about 15dB louder! For W995 user, the volume only differs in fastport, not 3.5mm jack... Try fastport, it's much more louder! But it's a bad news for a phone without csv...
- Fixed Bug: MH-700, a 3.5mm jack headset that has line out and line in (mic) had right channel duplicated from left, which make it sounds mono. My mistake in wbxml (HK BEARNADD). Fixed and thanks to idumbakumar for reporting
- Reconsolidating some folder

5.0 (05-09-2009)
- Adding folder "3. optional - choose only one\1. vkp patching to remove (+8) and (-8) manual eq limitation" Read further for more details.
- Only for csv users. Csv is changed. Better clarity and much louder volume. By using this csv, it can be claimed that this is one of the loudest acoustics in A2 wbxml modding world *

* Power output from phone circuit has been set as high as possible while still keeping a sounds without distortion at max bar with MegaBass eq.
Original csv only render MegaBass useless at max bar (the preset goes down from 14 0 0 0 3 to 6 0 0 0 3), which is not the case with this csv.
If the sound is distorted, then it is your hardware (headphone) limitation. Buy high quality headphone such as Audio Technica ATH-AD2000 or Grado GS1000i. Each of them are worth about a thousand dollar :D

4.0 (04-09-2009)
- Adding line_out support (such as MMC-60 accessories)
- 3. Bass is rewritten to 1. ClosedAir. Better soundstaging while still keeping its aggressive style. Best for rock, pop or other Bassy music
- 2. Loud is rewritten to 2. OpenAir. Better soundstaging and louder while still keeping its natural style. Best for jazz, live or other instrumental music
- 1. Clear is merged into 2. OpenAir
- Now all the wbxml doesn't depend on the csv. You may use original csv to get much louder volume but with little sacrifice in quality
- Little changes in csv and customize_upgrade.xml

3.0 (03-09-2009)
- 1. Flat is rewritten to 2. Loud. Much clearer with best loudness. May sound different in 3.5mm jack
- 2. Clear Crytallizer is rewritten to 1. Clear. Adding a little bass. Best clarity
- 3. Dynamite Crystallizer is rewritten to 3. Bass. Reduced distortion. Best bass and good for rock and house music

2.0 (02-09-2009)
- Bomb Crystallizer removed
- Dynamite Crystallizer added. Loud (compared to Flat and Clear). Better midrange, enhanced bass and aggressive style with little distortion. May sound different in 3.5mm jack. Must try!

1.8 (01-09-2009)
- Warmer sound and Clear Bass experience with increased clarity
- Now the acoustic becomes more compatible with A2 first generation phones
- Unneeded csv and wbxml was no longer available
- Sound frequency was equalized from wbxml itself so it's not necessary again to upload customize_upgrade.xml. Try MegaBass equalizer

1.7 (31-08-2009)
- csv is 1dB louder and dynamic range increased
- Added support for UIQ3 phones

1.6 (30-08-2009)
- Renaming Crystallizer Boom to Clear Crystallizer
- Adding Bomb Crystallizer wbxml with maintained bass, attack and treble with aggressive style.

1.5 (29-08-2009)
- Adding Crystallizer Boom wbxml with maintained attack, treble and clarity.

1.1 (28-08-2009)
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF

0.9.1 Beta (25-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- Upload csv files in "csv to tpa-preset-acoustic, not for A2v1 or UIQ" folder to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones or UIQ3
- There are two types of wbxml, so just choose only one. Upload wbxml files in "wbxml to ifs-settings-acoustic" folder to ifs/settings/acoustic. If your phone is not W995, do not upload phf_jack_play.wbxml
- It's not necessary to upload customize_upgrade.xml in "3. optional - choose only one\2. customize_upgrade_xml to tpa-preset-custom, not for Clear Audio or UIQ" folder to tpa/preset/custom. Read further for more information. If your phone has Clear Audio Experience or it was UIQ3, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. You can customize manual equalizer as you wish.

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Q: I have UIQ3 phones. How to use this acoustic?
A: Don't upload csv and customize_upgrade.xml. Just open "wbxml to ifs-settings-acoustic" folder, choose your acoustic, and rename *.wbxml to *.aat. Upload it to your phones.
It's not necessary to upload phf_3_play.aat and phf_jack_play.aat

Q: What is "3. optional - choose only one\1. vkp patching to remove (+8) and (-8) manual eq limitation" folder?
A: By applying these patch, you will theoritically more extreme manual equalizer. +-8 bar limitation becomes +-14 bar

Q: How to apply that?
A: Read || here || for more information

Q: I didn't see my phones mentioned in this folder. Where is mine?
A: In this folder, these are some of the patch that I can find by googling. You can port the patch to your phone.

Q: How to port the patch?
A: Read || here || for more information

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "3. optional - choose only one\2. customize_upgrade_xml to tpa-preset-custom, not for Clear Audio or UIQ" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 5 |. MegaBass value is | +14 | 0 | 0 | 0 | 3 |, and now you can customize it furthermore.

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-14dB will not work. For example, 17dB value will be ignored. +/-14dB would be set instead.

Q: I want to edit more than 14dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:

http://i27.tinypic.com/elckno.jpg

It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||



Hiron

Thanks! You totally changed my aural experience with my Naite!:)

so can i put this into my k850i?

can this be used with w995?