Sorry if advertised in wrong section.
Ok i think my k800 is dead, it wouldnt turn on, all i would get is a long flash of red from the infared, and then 5 flashes the 2nd time i try turn it on, SO...
Plugged it in for charging and it gave the long red flash, left it for 6 hours, came back tried to turn it on, and still the long red flash, and 2nd attempt 5 flashes.
I thought it might be the battery, so i bought a newy, chucked it in, and let it be on charge for a good 8 hours, tried turning it on... red flash, then 5 flashes.
Reading up from this very helpful site, following all instructions, downloading XS++ and the USB driver.
Followed these steps:
Quote:
1.Turn off phone.
2. Start XS++ and click Connect.
3. Download -> SEMP_USB_Driver and click Extract Here on Desktop.
Hold "C" on phone and connect with USB cable.
Yet nothing, no prompt for new usb detected...
Please help soon.
Thanks
If this helps, every try i do it properly.
20:33:52| TURN OFF PHONE!
20:33:52| Hold 'C' button on phone and connect phone NOW.
20:33:52| You have 30 seconds...
20:33:52|
20:34:22| Error: Cannot open phone communication port
20:34:24| Disconnected... Unplug the phone
20:34:27|
20:34:27| Attempting to open the interface...
20:34:27|
20:34:27| TURN OFF PHONE!
20:34:27| Hold 'C' button on phone and connect phone NOW.
20:34:27| You have 30 seconds...
20:34:27|
20:34:57| Error: Cannot open phone communication port
20:34:59| Disconnected... Unplug the phone
