final hurdle... quick access patch
I have successfully applied the simlock unlock patch, using setools2 lite.
With "bybpass 2020" selected, also main firmware in first box and unlock patch in "misc" box, setools bypasses security, flashes main file and then finally applies patch.
And it all works. I can use this 3 phone on Orange now. Great ;)
--
For future reference tho, I want to find out why the "quick access" method failed for me.
Again, applying the "quick access" vkp file with "bypass 2020" and main firmware file *succeeds*.
Patch is written and phone can start (but is still sim-locked).
Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901048200 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901048200 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\Documents and Settings\k9\Desktop\r1gk001\K610_R1KG001_MAIN_GENERIC_TH_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: D:\Documents and Settings\k9\Desktop\SeTool 2 Lite - 1.11 - Dengel Share\qamaker\quick_access_K610_R1KG001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45B40000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:706 secs.
The above shows applying qapatch is successful.
After this, attempts to apply further patches with "use quick access patch" *fail*.
Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901048200 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Going to execute VKP script....
Enable alternative security bypass !!!
Starting to process VKP patch script: D:\Documents and Settings\k9\Desktop\simlockpatchgen_v2.1_656\vkp\Remove_SIM_lock_K610_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Block @ $44700000 read error. Have only: 00000000 bytes
Elapsed:58 secs.
Notice line "Enable alternative security bypass !!!"
Then notice error "Block @ $44700000 read error. Have only: 00000000 bytes"
So why did the quick access method fail for me?
Re: final hurdle... quick access patch
when applying further patch, you should only choose the "use quick access patch"
Re: final hurdle... quick access patch
hi i am in need of a quick access.vkp for my sony ericsson k770i can anyone help me out here
Re: final hurdle... quick access patch
Flash only Main (K610_R1KG001_MAIN_GENERIC_TH_RED52.mbn) then again apply Quick access patch.
After apply Quick access patch you must select:
Phone Type: K610 and see screenshot how to apply patches:
http://img195.imageshack.us/img195/83/809921orig.jpg
Afeter Identify must disconnect USB cable, and after click Write SCRIPT hold "C" button on phone and connect with USB cable.
