Need HELP z610i

dear expert!

it was a bad idea to flash my z610i... but anyway...

now I have set_gdfs_props failed!

If you can tell me what to do now? Is it possible to repare this z610i or I have to forget about?

Thanks in advance!


ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3528********* CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:5 secs.

sorry... I forget to say... it is possible to flash it, but the main problem - mobile not starting any more...

waiting for help...

does that phone have a power light thats green when its on if so when you press the power does it flash red?

OK!!! some good! it is starting now!

but problems not gone...

now if I power on after menu about flight and normal mode I choose normal and inpu PIN the next sentence appears on a screen
Configuration error. Please contact your network operator or service center.

Does it mean that I have to flash generic firmware on it?

and what is a comlete set of files?

main like Z610_R6DA001_MAIN_GENERIC_MY_RED52

file customisation like Z610_R6DA001_FS_C_ASIA_RED52 or generic as well?

some think more? finalisation files? what is it and where to get this one?

thanks a lot for answers!

You need CUSTPACK and you find him in download section - custom files - Z610custpack

can you say to me where I have to put cust file in SETool? I am fix all problems with z610, but have only russian set of files, by the way it is working well!

Quote:

---

Originally Posted by BIOS

can you say to me where I have to put cust file in SETool? I am fix all problems with z610, but have only russian set of files, by the way it is working well!

---

Put CUSTPACK in MISC in Setool2lite

if you are using SEtool box just reflash again the phone and check complete phone after flash... and use the latest version...

Yes, job done! for 2 phones, z610i and k770i, for the second one russian menu desapear after a few starts, but english on a right place, which is OK for me!


could some body tell me, if I make unlock for phone (which was OK) and after reflash again with all 3 files set, what can hapen? do i lose the unlocking or not?

sorry for stupid question, but flashing take a lot of time!

Also I install the quick access pack on phones, question is the same, what hapens is I decide to reflash it again?

Or probably I need only 2 filef FS and CUST?

thanks for answering!

Quote:

---

Originally Posted by BIOS

Yes, job done! for 2 phones, z610i and k770i, for the second one russian menu desapear after a few starts, but english on a right place, which is OK for me!


could some body tell me, if I make unlock for phone (which was OK) and after reflash again with all 3 files set, what can hapen? do i lose the unlocking or not?

sorry for stupid question, but flashing take a lot of time!

Also I install the quick access pack on phones, question is the same, what hapens is I decide to reflash it again?

Or probably I need only 2 filef FS and CUST?

thanks for answering!

---

If you reflash phone (like with new firmware) you need to apply QA and unlock patch again