Setool common errors READ BEFORE POST....

Hello people...:D
You might think I'm i newbie and don't know anything about SE :o, but lucky for me it's not like that....
So I wanted to translate my post from Spanish forum, and bring it to you and give some help to the website.

1. First of all you have to know what is a LOG:
How To Post An Identify Log? - Top Sony Forums

2. Check that you have:

- Installed USB FLash Drivers
- Battery well charged
- Cable makin good contact
- A clean Fast Port
- Try instead of C key with Recovery mode (2 + 5)

3. Setool2lite only supports phones:

DB2010/DB2012 CID49/50/51/52,
DB2020 CID49/51/52

For CID53, pnx5230, and Brown phones you have to use FAR Manager ;)
Using FAR+SEFP with a DB2012 DB2020 phone (Guide) - Top Sony Forums
Jdflasher CID53 update - Top Sony Forums

LOG:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35601911xxxxx CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:9 secs.

You only have to Flash MAIN, recovery mode might be needed

LOG:
IMEI MISMATCH ! GDFS IMEI:35220801162551

Your IMEI is changed!!!
-DB2010->Your phone might be stuck in Please Wait, you need OTP patch, but won't find it here....
If it's working normally DON'T FLASH IT!
-DB2020->Your phone might work pretty much just fine, but you have to remember that if you flash it it'll have original IMEI, and might bring some problems.... so:
DON'T FLASH IT!

LOG:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:*************CERT:RED
FLASH CID:53 COLOR:RED

Model:K800i
Brand:IL Orange
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:CENT_EUROPE
CDA article: CDA102511/132
CDA version: R1A
Default article: cxc1250490
Default version: R8BF003

Network LOCKED
Operator: MULTIPLE

Elapsed:7 secs.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501128276 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:18 secs.

You're trying to use setool for CID 53 phones, and it won't come out pretty well, you can only use FAR and Jdf.....

LOG:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1005 variables
gdfsWrite err:11,block:1,unit:3CA
gdfsWrite err:11,block:3,unit:FA3
gdfsWrite err:11,block:3,unit:1389
gdfsWrite err:11,block:3,unit:138C
gdfsWrite err:11,block:4,unit:1774
gdfsWrite err:11,block:4,unit:1B5C
gdfsWrite err:11,block:5,unit:232B
gdfsWrite err:11,block:6,unit:2713
done
Phone detached
Elapsed:80 secs

You have uploaded a GDFS that isn't yours and your phone is on Please wait (PLEASE WAIT ONLY HAPPENS IN DB2010), you need a BOX not more....

LOG:
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
writing D:\w300i\k310\K310-W200\W200_R4HA014_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Can't get packet properties.
verify block error
last blk:44940000,00010000
Elapsed:663 secs.

Frequently it's caused because your battery "died" during the flash, try with another well charged battery, if it doesn's work, post your LOG and your problem.. :D

LOG:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\Admin\Escritorio\FINWARE W810\Setool Lite v1.11 Mi Sony Ericsson\rest\R4EK001_CXC1250316_GENERIC_HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:51 secs.

Your phone is probably "dead" it's causeb because you dont have REST file in the rest path.....create it with the ssw2rest.exe and try again you may have to Flash MAIN........

LOG:
ChipID:9900,EMP protocol:0301
erom_readvar: can't read all data
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.

This is ONLY a conection problem....
Check your battery, cable, USb port, Fast port, etc

LOG:
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301xxxxxx CERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed:9 secs.

Your GDFS is corrupted or damaged , you need a BOX to fix it.........

LOG:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:501 secs.

Flashing MAIN would be pretty much just it, if it doesn't work flash FS and after having it well flashed you can finish it with the CDA

LOG:
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500007359 CERT:RED
FLASH CID:49 COLOR:BROWN

Model:W600i
MAPP CXC article: R7B039 prgCXC1123106_GENERIC_EE
MAPP CXC version: R7B039
Language Package:LAM_1
CDA article: CDA102453/9
CDA version: R2A
Default article: cxc1123107
Default version: R7B039

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500007359 CERT:RED
DCU60 flashing only supported for RED CID49 phones !
Elapsed:7 secs.

Your trying with a BROWN phone and setool doesn't support it, you have to use FAR Manager to pass it to red or flash it with BROWN files, but only with Far Manager ;)

LOG:
RESTORATION FILE NOT PRESENT
"R1DB001_CXC1250514_EU_1_CR"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

You don't have the REST file in the rest patch for setool........

LOG:
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1123260_GENERIC_JE
Restore from:R4EA031_CXC1123260_GENERIC_JE
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 67324752 variables
gdfsWrite err:A,block:14,unit:0
Exception in GDFS write. maybe bad gdfs file.
done
Failed.
Elapsed:111 secs

Some part of the GDFS you're trying to upload is corrupted or damaged, take it to a BOX to fix the problem ;)

ONLY FOR K790/K800/K810 PHONES...
LOG:
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102568/111
MODEL:K790i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:0000000000 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing I:\MODIFICACIONES PARA K790a\K790_R8BF003_MAIN_GENERIC_EV_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing I:\MODIFICACIONES PARA K790a\K790_R8BF003_FS_AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4340
HDR block not accepted,error:15
Elapsed:273 secs.

This only happens with CID52 FS...
yoy have to:

- get a CID53 FS of the same FW version
- Apply quick acces patch to your MAIN
- Marck use "quick access" patch
- Put CID53 FS in ADD
- Click on FLASH!

Phone will complettly flash your FS and still will be CID52 so you can Patch and use setool :D

MODS I'm pretty sure you know me....
I just wanna help a little in this website, like spanish forum helped me....
Hope you don't mind and just expect a MORE! ;)