Extracting the FileSystem

[jasmin]

Here's how.

You need...

- Firmware (FS, You can download it from the downloading sections)
- main2raw.exe
- SEFStool4.exe
- cmd.exe

(main2raw.exe, SEFStool4.exe are made by Darkmen)

Download the Application


Step 1

Drag the .fbn to main2raw.exe. When it converted, press Enter and the file appear as .raw.



Step 2

Note: It will not work, if you drag .raw to SEFStool4.exe

Try to rename .raw to shorter name (i.e W580_R6BC002_FS_AMERICA_1_RED52.raw to W580.raw).



Open cmd.exe, and type sefstool4.exe <filename>.raw (i.e sefstool4.exe w580i.raw)



Step 3

You're done!



Press Enter to exit the cmd.exe

Here how it's look like



Extracted file show up!



Note: This tutorial sometimes don't work with different computer.

Nice day

[ama95]

It's not working for me. When I run "cmd.exe" it shows me this error:

D:\SE Firmware\K750\cmd.exe is not a valid Win32 application.

I'm using Windows XP Professional Service Pack 2.

Problem with "cmd.exe" is solved. If you have Windows XP just copy the "cmd.exe" from C:\WINDOWS\system32\ instead of extracting the one from archive. The "cmd.exe" in archive is from Windows Vista. :) Now I have another problem. When I start the proccess with "sefstool4.exe" it displays this error:

Loading k750.raw header...OK!
Detected FS image version: 23
FATAL: This version is not supported. Check entry file!

[Don Stefan]

works perfectly for me... you could also start cmd from start->run
tested with w200 fs

[japan6]

or Start -> All Programs -> Accessories -> Command Prompt

[lutfi14]

That's work FOr Fs w890i..,OR u have sefstool4 main2raw newer..!
Thank's before..

[h4$_426]

There is a DB3150 FileSystem Extractor. I have tested with K850_R1CA037_FS_CENTRAL-EUROPE_RED52.fbn
And extracts perfectly.

Just drag the firmware that you want to extract into the .exe file and it will start extracting itself

You can download it fom here
http://se.srzone.ru/load/0-0-0-87-20

Enjoy!!!

[jhayms]

i tried this one and good, but i think it can extract only 52. Do you have extractor for 53 FS?

[h4$_426]

Do you need a DB2020 CID53 FS Extractor or a DB3150 CID53 FS Extractor

It's not working for me. When I run "cmd.exe" it shows me this error:

I'm using Windows XP Professional Service Pack 2.

Problem with "cmd.exe" is solved. If you have Windows XP just copy the "cmd.exe" from C:\WINDOWS\system32\ instead of extracting the one from archive. The "cmd.exe" in archive is from Windows Vista. :) Now I have another problem. When I start the proccess with "sefstool4.exe" it displays this error:

What firmware are you trying to extract?

[jhayms]

Do you need a DB2020 CID53 FS Extractor or a DB3150 CID53 FS Extractor

What firmware are you trying to extract?

Extractor for DB2020 CID53... Do you have that? Please share:)...TY

[MaxDamage]

@jhayms
Read h4$_426's post ;)

Have a nice day :D