SonyEricss@n W300 i

[gicri]

Bueno ... ya esta hecho ... y me pasa lo mismo que describi anteriormente, despues de aplicar el patch, la pantalla queda en blanco parpadeando; el patch que aplique es:

;W300 SW-R9A036
;Remove SIM-Lock
;(c) IronMaster
;(p) stuck

+44140000
C94220: 70B5041CF0F21EF800230022011C1C20 F0B505213A22D1F72FFD0020F0BDC046
y lo saque de :

http://www.topsony.com/forum_es/parc...ch-t33096.html

el .log es:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Abort all operations.
Can't load id loader !
Elapsed:18 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx09xxxxx CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/82
CDA version: R5A
Default article: cxc1123203
Default version: R9A036

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:5 secs.
Elapsed:0 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35797701097421 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
can't open file "C:\Documents and Settings\Administrador\Escritorio\Sony Ericsson W300i\SETool2 lite 1.08\SETool2 lite 1.08\rest\R9A036_CXC1123260_GENERIC_JE"
Starting to process VKP patch script: C:\Documents and Settings\Administrador\Escritorio\111111111111111. vkp
VKP script loaded OK. Lines: 7
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44DC0000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:55 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35797701097421 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/82
CDA version: R5A
Default article: cxc1123203
Default version: R9A036

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:9 secs.


AYUDA POR FAVOR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HELP, HELP ....

[flexor]

Bueno ... ya esta hecho ... y me pasa lo mismo que describi anteriormente, despues de aplicar el patch, la pantalla queda en blanco parpadeando; el patch que aplique es:

;W300 SW-R9A036
;Remove SIM-Lock
;(c) IronMaster
;(p) stuck

+44140000
C94220: 70B5041CF0F21EF800230022011C1C20 F0B505213A22D1F72FFD0020F0BDC046
y lo saque de :

http://www.topsony.com/forum_es/parc...ch-t33096.html

el .log es:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Abort all operations.
Can't load id loader !
Elapsed:18 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx09xxxxx CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/82
CDA version: R5A
Default article: cxc1123203
Default version: R9A036

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:5 secs.
Elapsed:0 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35797701097421 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
can't open file "C:\Documents and Settings\Administrador\Escritorio\Sony Ericsson W300i\SETool2 lite 1.08\SETool2 lite 1.08\rest\R9A036_CXC1123260_GENERIC_JE"
Starting to process VKP patch script: C:\Documents and Settings\Administrador\Escritorio\111111111111111. vkp
VKP script loaded OK. Lines: 7
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44DC0000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:55 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35797701097421 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/82
CDA version: R5A
Default article: cxc1123203
Default version: R9A036

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:9 secs.


AYUDA POR FAVOR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HELP, HELP ....

SACASTES EL ARCHIVO REST QUE TE DIJE??
MIRA LO QUE DICE EL LOG, HASTA TE LO PUSE EN ROJO.

fabrica denuevo el archivo rest y metelo en la carpeta REST del setool.
tu version es 1.08 haslo con la 1.11 siempre con el proceso del archivo rest.

- aplica el parche como te dice luisz-aaa8

- y otra cosa, antes de hacerlo deves estar seguro de los pasos que estas haciendo
si estas dudando, lee denuevo el tuto de setool2lite, has respaldo de GDFS o la
puedes dañar.

los archivos deven ser de extension .FBN & .MBN no deven estar comprimidos.
no preguntes de donde los puedes descargar porque esta prohibido decir de que webs,
por eso esta la zona de descargas de top sony, y si lees mucho, vas subiendo y tienes
acceso a esa zona.

repito, deves estar seguro lo que estas haciendo.
fabrica el rest man