Z530 plese wiating

[LOW_BaterI]

hola ya ise lo ke me dijeron con los ajustes necesarios y el fono sigue en el mismo estado se congela a 30% de que se carga y sigue con el mensaje de please wating

aki un log de lo ise


___--------identifinc-------______-

Open COM port OK
ChipID:0000,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:xxxxxxxxxxxxxxxx
Model:Z530i
MAPP CXC article: R6DA001 prgCXC1250454_GENERIC_MU
MAPP CXC version: R6DA001
Language Package:MEDITERR
CDA article: CDA102461/11
CDA version: R2A
Default article: cxc1250290
Default version: R6BA032
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

SEARCH:\FlaSHe$\z530\Z530_R6DA001_MAIN_GENERIC_RED49.mbn
"R6DA001_CXC1250454_GENERIC_MU" CREATED
Elapsed: 34 secs.


_______________________________________________


Open COM port OK
ChipID:0000,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:xxxxxxxxxxxxxx

Model:Z530i
MAPP CXC article: R6DA001 prgCXC1250454_GENERIC_MU
MAPP CXC version: R6DA001
Language Package:MEDITERR
CDA article: CDA102461/11
CDA version: R2A
Default article: cxc1250290
Default version: R6BA032
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R6DA001_CXC1250454_GENERIC_MU"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

Elapsed: 4 secs.
Will backup GDFS now.
Open COM port OK
ChipID:0000,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
can't open file "D:\FlaSHe$\INSTALADORES\rest\R6DA001_CXC1250454_GENERIC_MU"
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
loader startup: executed
wrong response, break.
loader GDFS startup failed, that is fatal
Elapsed: 238 secs.
Open COM port OK
ChipID:0000,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 15 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
can't open file "D:\FlaSHe$\INSTALADORES\rest\R6DA001_CXC1250454_G ENERIC_MU"
Setting up GDFS...
no ack during gdfs_readvar !
Can't read CRITICAL data
Unlock FAILED
Elapsed: 118 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

MODEL:Mulan GEN
CDA: CDA102461/107
CDA REV: R2A
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
can't open file "D:\FlaSHe$\INSTALADORES\rest\R6DA001_CXC1250454_G ENERIC_MU"
writing D:\FlaSHe$\z530\Z530_R6DA001_MAIN_GENERIC_RED49.mb n
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:329
Will flash 329 blocks...
SSW loading returns:0
writing D:\FlaSHe$\z530\Z530_R6DA002_FS_AMERICA_2_RED49.fb n
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:121
Will flash 121 blocks...
SSW loading returns:0
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed
Writing package "D:\FlaSHe$\z530\tpa.zip"...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (2048)
Customize.xml (2290)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
SETT_RINGTONE_HOOK_3.itm (10240)
Phone detached
Elapsed: 510 secs.
Processing script "D:\FlaSHe$\z530\tpa.zip"...
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.


Bueno espero que me sigan ayudando

[MC Kalonji]

yo he visto que cuando sale "Can't read SCRC unit" Solo se puede reparar con test point y para el Z530 si hay test point a diferencia del W810/w300 que no tienen, busca el diagrama del testpoint sino tienes otra solucion

[LOW_BaterI]

Ivan08v gracias volvi a realizar tu procedimineto y ya esta el fono funcionando , perdonen el retrazo gracias a todos por la ayuda prestada

FOno Solucionado