CAMDRIVERS A2/3 (DB3150/3200/3210/3350)

[HADEZ89]

:a183:basado en el camdriver original v2.9:a183:

this will change ISO only for xenon ON,

* Default = Auto ISO --> ISO 200, 1/8s

* ISO 100 = ISO 100, shutter speed slow (less than 1/8s).

* ISO 200 = ISO 200, shutter speed less than 1/10s

* ISO 320 = ISO 320, shutter speed less than 1/10s

* ISO 400 = ISO 400, shutter speed medium, between 1/30s - 1/40s

bug : Xenon ISO 320 sometimes not working if use flash on bright condition. ISO will set to 200 not 320.


// Change "Effects menu" to "manual menu"
* OFF = auto mode (this is for changing exposure value)


* WB & Effects :

reduce EV (-0.3 to -2.0) to change white balance.
increase EV (+0.3 to +2.0) to change effects


* Set Sharpness :

EV -0.3 --> minimum sharpness (value = 0)
EV 0.0 --> default sharpness (value = 1)
EV +2.0 --> maximum sharpness (value = 9)


* Set Saturation :

EV -2.0 --> minimum saturation (value = 25)
EV 0.0 --> default saturation (value = 162)
EV +2.0 --> maximum saturation (value = 256)

in original camdriver, default value is 128 (hex 80). in this mod, it is on ev -0.7


* Manual Focus :

first, set "focus" to "infinity"

then, reduce or increase EV to change focus.
EV -2.0 = maximum focus (far distance/infinity)
EV +2.0 = minimum focus (close/makro) --> max makro distance at 8cm.

// Enable Forced Flash for Flash Auto and RER :a183::a183::a111: