CAMDRIVERS A2/3 (DB3150/3200/3210/3350)

[hamachi.m1]

Aqui les dejo un camdriver para el K850, lo encontre vagando por el internet... toma unas fotos muy buenas, pruebenlo no se van a arrepentir, aqui el link:

Cybershot_Xperience_by_Witchking_6.5.zip

Los creditos de este camdriver van para su creador...

Aqui les dejo una foto rapida tomada por mi, comparando este camdriver que posteo y el CybershotT_v8.0_BestPicColorT_Final_for_k850



CybershotT_v8.0_BestPicColorT_Final_for_k850




Cybershot_Xperience_by_Witchking_6.5



Edito:

Aqui estan unas especificaciones sobre como utilizar este cam para mejores resultados, estan en ingles pero igual no es muy dificil de entenderle.

CYBERSHOT XPERIENCE 6.5
Change-log:
*Record in two video resolutions with one driver
To record in 320 x 240 , just switch to video mode without Night Mode and record
To record in 352 x 288, turn Night Mode on by pressing 6 button.
*Changed Manual Colour Correction codes:
You can now mix different shades to add better colours to your images!
(I planned a tutorial for this but sadly there's a problem with my ISP and i can't use any upload service)
*More colours in all scenes
*Changes in twilight Portrait mode to make it less slow.

Why choose Cybershot Xperience?
So many additional settings such as ISO Control for both flash and non-flash shots, Shutter-speed control, manual Focus, Manual Contrast, Manual Saturation, manual sharpness, colour balance: Cyan, Red, Yellow, Purple, forced flash, Focus and other features in video mode e.g. video resolution selection and lots others!
There's much you can gain as this driver has all characters of a super-mode driver. Use and Enjoy.

USING IN AUTO-SCENE:
___________________

Outdoors:
Use in Auto-mode, turn Flash and Colour Correction to AUTO by # key to Turn Colour Correction on.
If you prefer less vivid colours, you may turn colour correction off by turning flash off.
Indoors:
Turn Flash off or on as you desire and simply capture a pic.
-------------------------------------------------------------
Complete list of Manual Settings:
_________________________________

*EV Control has been changed to ISO control.
This works both with Flash Off and Flash On mode, so you can now simply raise Flash Exposure and ISO by raising EV in normal mode. This makes it a very easy and quick way for using flash ISO of your choice.


*Flash Shutter-speed control
Select RER flash and balance Shutterspeed by EV buttons
Shutter-speed control for non-flash shots coming soon.

*Record videos in two different resolutions!
To record in 320 x 240 , just switch to video mode without Night Mode and record.
To record in 352 x 288, turn Night Mode on by pressing 6 button. Night Mode has been replaced with Higher Resolution mode.

In Effects menu, Manual Settings have been implemented as follows:
*Manual Focus (Previously Black and White)
(ALL FEATURES ALSO WORK IN VIDEO MODE SO NOW WE CAN RECORD MACRO VIDEOS WITH [hw]K850[/hw].
Preview:
http://www.4shared.com/file/111993991/38fd937e/MOV02197.html )
*Manual Contrast (Previously Negative)
*Manual Saturation (Previously Sepia)
*Selection of effects with EV values (Previously Solarize)

In White Balance menu, Manual Settings have been implemented as follows:
*Manual Sharpness (Previously Daylight)
*Manual Colour Balance between Cyan and Red (Previously Cloudy)
*Manual Colour Balance Between Yellow and Purple (Previously Fluorescent)
*Selection of White Balance with EV values (Previously Incandescent)
-------------------------------------------------------------
Using Manual Settings:
______________________

First of all, upload en.lng to tpa/preset/system/language

This will:

*Change Text in Camera Interface according to driver.
*Add brief Tutorial/Help in camera interface for each Manual Setting used in the driver.
________________

To use ISO (Light Sensitivity) Control:

In normal mode (without flash), simply raise or lower EV to control ISO as below

EV = ISO

-2.0 = ISO 100
-1.7 AND 1.3 = ISO 125
-1.0 = ISO 160
-0.7 = ISO 200
-0.3 = ISO 250
0.0 = AUTO
+0.3 = ISO 320
+0.7 = ISO 400
+1.0 = ISO 500
+1.3 = ISO 640
+1.7 = ISO 800
+2.0 = ISO 1000

For Flash Shots:

EV = ISO

-1.0 = ISO 100
-0.7 = ISO 125
-0.3 = ISO 160
0.0 = AUTO
+0.3 = ISO 200
+0.7 = ISO 250
+1.0 = ISO 320
+1.3 = ISO 400
+1.7 = ISO 500
+2.0 = ISO 640

________________

To use Manual Focus:
Set focus to INFINITE.
Go to the last tab in camera menu labelled Manual Settings (1).
Select Focus.
Use D-pad to change EV value. EV value will change lens position rather than exposure, so you can focus manually


-2.0 = 0 Focus steps (Infinite)
-1.7 = 4
-1.3 = 8
-1.0 = 12
-0.7 = 16
-0.3 = 18
0.0 = 20
+0.3 = 22
+0.7 = 24
+1.0 = 26
+1.3 = 28
+1.7 = 30
+2.0 = 32 (Closest focus step)

________________


To use Manual Contrast:
Go to the last tab in camera menu labelled Manual Settings (1).
Select Contrast
Change EV with D-pad to change contrast and to level your pictures manually.
EV = -2.0 (Black Contrast)
EV = +2.0 (White Contrast)
________________

To use Manual Saturation:
Go to the last tab in camera menu labelled Manual Settings (1).
Select saturation
Change EV to change Saturation.
EV = -2.0 (Minimum Saturation or Black and White pictures)
EV = + 2.0 (Maximum or insane Saturation)
________________

To use Effects:


Go to the last tab in camera menu labelled Manual Settings (1).
Select Effects
Use EV to switch between effects
EV = +0.3 (Negative)
EV = +0.7 (Solarize)
EV = +1.0 (Sepia)
EV = +1.3 (Black and White)
________________

To use Manual Sharpness:
Go to the second tab in camera menu labelled Manual Settings (2).
Select Sharpness and balance it by EV buttons
More sharpness can sometimes result in more noise.
EV = -2.0 (Minimum)
EV = +2.0 (Maximum)
________________

To use Manual Colour balance:
Go to the second tab in camera menu labelled Manual Settings (2).
Balance Cyan-Red or Yellow-Purple as you desire.
Configure with EV as below.
EV = -2.0 (No extra colour)
EV = -1.7 to 0.0 (First Colour intensity. Max at 0.0)
EV = 0.3 to + 2.0 (Second colour intensity. Max at 0.3)