ayuda! w300 muerto

[soii_carli]

.... ya no se que aser con estooo ayudaaa se flashea pero en el ultimo paso no se q pasaaaaaaaaaaaaaaaaaaaaaaaaa esto me dice:
identific:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/98
CDA version: R2A
Default article: cxc1123203
Default version: R9A036

Operator: 000-00

USERCODE:0000

Elapsed:36 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102499/98
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
ldr_on_ldr hdr no ack,err:10
mempatcher fails to load
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
Elapsed:165 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:15 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:90 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\Administrador\Mis documentos\Mis imágenes\W300\W300i_R9A036_MAIN_GENERIC_JE_RED49.m bn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Administrador\Mis documentos\Mis imágenes\W300\W300i_R9A036_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properties.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:650 secs.

y eso me dice...al final!! alguna idea ya sinceramente no se que aser... me dan ganas de revolearlo por la ventana... pero no lo ago por q es de un amigo ajja--

[iceman607j]

oye amigo ya te lo dije lo mas facil de hacer y lo mas simple es un full flash aqui en topsony hay muchos que han subido tutuoriales para poder hacerlo la verdad no es muy complicado solo necesitas el firm necesario y listo si quieres un consejo busca en los foros de aqui de preferencia en los de setool ahi encontraras lo que necesitas saber acerca de un full flash

para la otra ten mas cuidado no tengas miedo a muchos aqui nos ha pasado igual y pues la mayoria lo hemos resuelto

[maco023]

.... ya no se que aser con estooo ayudaaa se flashea pero en el ultimo paso no se q pasaaaaaaaaaaaaaaaaaaaaaaaaa esto me dice:
identific:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102499/98
CDA version: R2A
Default article: cxc1123203
Default version: R9A036

Operator: 000-00

USERCODE:0000

Elapsed:36 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102499/98
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
ldr_on_ldr hdr no ack,err:10
mempatcher fails to load
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
Elapsed:165 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:15 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:90 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601874903 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\Administrador\Mis documentos\Mis imágenes\W300\W300i_R9A036_MAIN_GENERIC_JE_RED49.m bn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Administrador\Mis documentos\Mis imágenes\W300\W300i_R9A036_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properties.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:650 secs.

y eso me dice...al final!! alguna idea ya sinceramente no se que aser... me dan ganas de revolearlo por la ventana... pero no lo ago por q es de un amigo ajja--

hola aqui marque algunos problemas en principio te falta hacer el rest ahora estoy corto de tiempo pero busca en los tutoriales de como hacerlo, antes que me olvide urgente tenes que hacer respaldo de gdfs de tu cell. limpiar el fast port (donde conectas el cel) y pasa por aca para que sepas bien que significa lo que te marque.

LOGs comunes setool2lite, LEER ANTES DE POSTEAR! - Top Sony