Problema k800 flasheo

[odi_uy]

Hoy flashie mi k800 con el Setool2lt 1.11

y ahor ame da un error "error de configuracion Contate a su operador de red o centro de servicio"

mi cel es CID52 y quiero pasarlo a español
que puede ser?
les pego el log del setool

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:92 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:30 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701308878 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:30 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701308878 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701308878 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\K800\Firm\CID52\K800_R8BA024_FS_AMERICA_2_RED52 .fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4340
Will flash 217 blocks...
SSW loading returns:0
writing D:\K800\Firm\CID52\K800_R8BA024_MAIN_GENERIC_WI_RE D52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:2280 secs.


Gracias

[[jls]]

Sube bien el custom pack igual y no lo subiste nien y ponle el que es de tu region con setool en misc file colocalo y despues le das write scrip y sigues los pasos de setool

[DJ freaks]

hola bro ,,,

mira el log que pegas parece mas un log de aplicar el quick access.....

Recuerda seguir paso a paso el tutorial de setool

si tienes dudas postealas....

Lo de error de configuracion aparece porque metiste un custompack de una compañia o un custom que no es america 2