w200 muerto

[droht]

me llego este equipo hoy, lo flahee y arroja este error.

SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 18 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
erom_readvar: error reading unit 1/725
error while reading SIMLOCK SIGNATURE unit
phone was tampered with other software
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE,GDFS OR EMPTY PHONE
Flash ID check:0000
ReadOTP failed, exiting
PROCEDURE WAS STOPPED BY USER
Elapsed: 118 secs.
PRELOADER SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
erom_readvar: error reading unit 1/725
error while reading SIMLOCK SIGNATURE unit
phone was tampered with other software
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE,GDFS OR EMPTY PHONE
Elapsed: 11 secs.
SIGNED MODE (USING SERVER).
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
erom_readvar: error reading unit 1/725
error while reading SIMLOCK SIGNATURE unit
phone was tampered with other software
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE,GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 7 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35540501250480 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\teccel computacion\Escritorio\2020 cid52(k790 k550 w580)\flashes\w200 cid52\r4gb001\W200_R4GB001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
SSW loading returns:0
writing C:\Documents and Settings\teccel computacion\Escritorio\2020 cid52(k790 k550 w580)\flashes\w200 cid52\r4gb001\W200_R4GB001_FS_AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 778 secs.

[Jurado]

el fs al subirse fallo prueba con otro debe estar mal el que estas usando.

[Ivan08v]

El telefono fue modificado con Dreambox

USA EL CABLE COM (el que sale de la box)
Marca Signed Mode en settings
Carga el txt que te paso en Misc Files
Presiona Write Script...

Luego que finalize hace un fullflash (tendras que marcar tambien Signed Mode)

Suerte

[droht]

aparece este error cuando estoy escribiendo el script

v0.914034/UNI
CARD SERIAL: 00047358
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER).
Processing script "C:\Documents and Settings\teccel computacion\Escritorio\DB2012 Tampered with Dreambox.txt"...
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35540501250480 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:2019
Flash props sent ok
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 203 secs.

[Ivan08v]

Seguro que presionaste Write Script y no FLASH?

Si el problema es presionando Write script, intenta primero flashear un Main de otra version y luego aplicar el script nuevamente....

[Ivan08v]

Por favor analizar los logs antes de postear

ya sabes que cid es???? te recomiendo bajarlos los correctos y asi lo podras hacer bien todo

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52---------------->SU CID
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35540501250480 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\teccel computacion\Escritorio\2020 cid52(k790 k550 w580)\flashes\w200 cid52\r4gb001\W200_R4GB001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52---------------->CID del FW
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
SSW loading returns:0
writing C:\Documents and Settings\teccel computacion\Escritorio\2020 cid52(k790 k550 w580)\flashes\w200 cid52\r4gb001\W200_R4GB001_FS_AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52---------------->CID del FW
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal

[dreechan]

Ese w200 fue abierto con dream box aplica el parche como te dijo ivan, solo presionando write scrip y flashea cona rchivos del soporte, saludos