ya hice estos pasos de marcar "Bypass DB2020 security" junto con el .mbn y en MISC puse el parche se tardo muchisimo pero me aparecio estoy aun asi no se aplico ningun parche:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401348049 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401348049 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\Administrador\Mis documentos\Jonathan\flash cel\pack_para_w610\pack para w610\W610_R6BC002_MAIN_GENERIC_NA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Administrador\Escritorio\MegaPatch_for_W6 10_R6BC002_by_Denim-610\MegaPatch by Denim-610 for W610(R6BC002).vkp
VKP script loaded OK. Lines: 16551
max patches number exceeded (65536)
Elapsed:1218 secs.

Despues aplique solo el parche y este es el error que me marca y eso que mi bateria esta al 100%:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401348049 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Administrador\Escritorio\Smiles Bateria.vkp
VKP script loaded OK. Lines: 4191
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45740000
New block #0001 added: $45900000
Blocks selected OK. Reading blocks: 2
Block @ $45740000 read error. Have only: 00000000 bytes
Elapsed:862 secs.

tambien lei que tengo que hacer un archivo .vkp en la carpeta de qamaker y poner ahi el .mbn de mi cel y arrastrarlo al archivo .exe para que se haga el .vkp y despues aprieto "enter" es lo que me dice y se cierra la ventana y los cargaba con el setool y ya podia poner parches pero no aparece nada antes lo habia echo y si habia aparecido y ahora ya no