[RESUELTO] k310 cid 49 a w200 cid 50,51,52

[snapsis]

mi pregunta es si puedo pasar este k310 cid 49 a w200 cid 50,, sin tener que subir de cid antes para poderlo flashear o si lo puedo hacer asi directamente de cid 49 a cid 50 de w200..o si tengo que subirlo alguien me puede explicar como subir de cid este telefono con el setool...??????????'

[URBANO]

Hola amigo, si puedes , cuando el k310 es cid49 , le puedes cargar cualquier archivo w200 de cualquier cid(sea cid50/1/2) y ademas al transformarlo seguira siendo cid49.

saludos.

[porter7]

puedes aplicar una version de fimware del k310 que sea cid 50 i lla que este en cid lla lo podrias pasar al w200 cid 50

[bynthom]

siendo cid 49 corren todos, te recomiendo el cid52 del W200, yo lo tengo y hasta el momento ningun problema, dale con R4HA014, puedes modificarlo muy bien

[snapsis]

bueno ya lo hice y el cel prende pero solo da pantallasos blancos,,priemero lo hice con un cid 50 y depues con uno 51 pero no da...miren el log:

 
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
writing C:\Documents and Settings\usuario5\Mis documentos\Nero\W200_R4GB001_FS_AMERICA_2_RED51.fbn
CURRENT FLASH FILE CID:51
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
Elapsed:140 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/107
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
CSloader version:
SETOOL2 LITE  COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:218 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
writing C:\Documents and Settings\usuario5\Mis documentos\Nero\W200_R4GB001_MAIN_GENERIC_ME_RED51.mbn
CURRENT FLASH FILE CID:51
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
SSW loading returns:0
Elapsed:204 secs.

que opinan??
bueno lo importante es que el problema es este:

 
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal

[URBANO]

 
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
writing C:\Documents and Settings\usuario5\Mis documentos\Nero\W200_R4GB001_FS_AMERICA_2_RED51.fbn
CURRENT FLASH FILE CID:51
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
Elapsed:140 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/107
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
CSloader version:
SETOOL2 LITE  COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:218 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101221124 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
 
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GB001_CXC1250719_GENERIC_ME
Restore from:R4GB001_CXC1250719_GENERIC_ME
can't open file "D:\richard\FLASHEAR\Programas\Setool2lite V1.11\rest\R4GB001_CXC1250719_GENERIC_ME"
writing C:\Documents and Settings\usuario5\Mis documentos\Nero\W200_R4GB001_MAIN_GENERIC_ME_RED51.mbn
CURRENT FLASH FILE CID:51
SSW uses complete hash, hash len is:6340
Will flash 317 blocks...
SSW loading returns:0
Elapsed:204 secs.

Hay lo deje bien marcado, que no tiene el rest , la setool2lite v1.11 no la trae incluida.

amigo els_al9113, sale Restore from:R4GB001_CXC1250719_GENERIC_ME
pero eso es solo el nombre a buscar del rest y no lo encontro por eso da el error(lo que marque en rojo).

saludos.

[els_al9113]

amigo pasate por aqui...
ERRORES COMUNES setool2lite Leer antes de postear!! - Top Sony


saludos

[snapsis]

es verdad lo de los herrores comunes ya los habia visto,,y estoy al tanto de todo eso y ya hice lo que merecomiendan pero el cel sigue dando pantallasos blancos

[els_al9113]

osea amigo ya intentaste solo con el main....

y bueno con el flasheo completo.....mira te recomiendo hacerlo con otro cid mas actualizado...quizas resulte

saludos

[snapsis]

ok ,,a lo mejor de y si no ,,,yo tengo el backup de el gdfs y de la main en .bin puedo usarlos ya que el cel esta en proceso de convercion o tengo que flashearlo otra ves a k310 para subirle la gdfs y el main originales??