raro

[gaara90]

tengo experiencia flasheando telefonof pero esto que m epaso es muy raro, me pasaron un k310 y trate de convertirlo a un w200 y salio lo siguiente

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
Can't load id loader !
Elapsed:27 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4EA031 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4EA031
Language Package:AMERICA_2
CDA article: CDA102570/45
CDA version: R5A
Default article: cxc1250474
Default version: R4EA031

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

Elapsed:7 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/16
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250466_GENERIC_DO
Restore from:R4EA031_CXC1250466_GENERIC_DO
Send superblock command NAK
writing C:\Documents and Settings\Versus\Escritorio\W200_R4HA014_FS_AMERICA _2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
ldr blk write fail. fatal
HDR block not accepted,error:BA
Elapsed:49 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:17 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
phoneid error 1
Phone info read error ! PLEASE CHECK MODEL !
Elapsed:10 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:18 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:28 secs.

de ahi el telefono no prende y no lo reconoce el setool..
que puede ser?

[kalel25]

Send superblock command NAK.

Pila baja,cargala.

[psikobeto]

phoneid error 1
Phone info read error ! PLEASE CHECK MODEL !
Send superblock command NAK.

cARGA TU PILA
CHECA EL FIRM QUE SEA DE EL W200 O EL MODEL QUE ESTA EN SETOOL

[s.k.a.r.r.]

Tambien lean esta parte:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
Can't load id loader !
Elapsed:27 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT

Otro error mas y amigo asegurate que sea realmente un k310 y no un k310 armado con tarjeta ddee otro modelo similar. Es mi opinion ya que yo he armado telfonos convertidos para venderlos con genuinos(k750@w800 con la carcasa del w800)

[GatoHern90]

utiliza un cargador de mesa o la batería de un amigo, ya que probablemente tu cell no la pueda cargar...
ya que mientras el cell tiene un mal flasheo no se puede cargar...

intenta tan bien limpiar el fastport de ese teléfono, ya que varias veses no detecto el modo flash... y daba este error justo antes de entrar en modo flash

err: 39 (30)
loader payload not accepted
Can't load id loader !

jeje s.k.a.r.r. tiene mucha razón, verifica el modelo...