AYUDA W300

[ZenoX]

Nesesito ayuda aqui es el log cuando entro al far manajer se queda despues de entrar al FS lo "flashee" 2 veces por si acaso pero nada les agradesco de antemano

Shutting down...
17:51:52| XS++ v1.2 Ready !
17:52:43| Attempting to open the interface...
17:52:43| ++++++++++++++++++++++++++++++++++
17:52:43| Turn off phone
17:52:43| Hold C Button on phone and connect phone.
17:52:43| You have 30 seconds.
17:52:43| ++++++++++++++++++++++++++++++++++
17:52:50| PORT STATUS: ACTIVE
17:52:50| Baseband ID: 8040
17:52:50| Hardware Platform: db2010 Marita compact
17:52:50| Protocol Version: 3.1
17:52:50| Sending loaders\db2010_cid00_prodid_p3k.bin...
17:52:51| This is a PRODUCTION_ID loader
17:52:51| Activating GDFS...
17:52:52| phone name detected
17:52:52| ++++++++++++++++++++++++++++++++++
17:52:52| PHONE INFO
17:52:52| ++++++++++++++++++++++++++++++++++
17:52:52| DBID: db2010
17:52:52| OTP CID: 49
17:52:52| EROM CID: 49
17:52:52| EROM color: Red
17:52:52| IMEI: 35207901xxxxxx
17:52:52| Phone: W300
17:52:52| Operator: AMERICA_2
17:52:52| CDA: CDA102499/100 R6A
17:52:52| Firmware: R9A035
17:52:52| EROM: n/a
17:52:52| ++++++++++++++++++++++++++++++++++
17:52:52| Ready for operation!
17:54:32| Sending loaders\db2010_cid49red_flash_r2a003.bin...
17:54:32| This is a FLASH loader
17:54:32| +++ Now flashing firmware main...
17:54:33| Sending flashfile D:\Alvaro\W300\NUEVA\W300i_R9A036_MAIN_GENERIC_JE_ RED49\W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn
17:54:33| 336 flashblocks
17:57:37| Finishing flash
17:57:37| Done flashing
17:57:37| +++ Now flashing filesystem...
17:57:38| Sending flashfile D:\Alvaro\W300\NUEVA\W300i_R9A036_FS_AMERICA_2_RED 49.fbn
17:57:38| 157 flashblocks
17:59:04| Finishing flash
17:59:04| Done flashing
17:59:04| ++ Flashing was successful
17:59:06| Disconnected... Unplug the phone
17:59:20| Shutting down...
17:59:58| XS++ v1.2 Ready !
18:00:01| Attempting to open the interface...
18:00:01| ++++++++++++++++++++++++++++++++++
18:00:02| Turn off phone
18:00:02| Hold C Button on phone and connect phone.
18:00:02| You have 30 seconds.
18:00:02| ++++++++++++++++++++++++++++++++++
18:00:07| PORT STATUS: ACTIVE
18:00:07| Baseband ID: 8040
18:00:07| Hardware Platform: db2010 Marita compact
18:00:07| Protocol Version: 3.1
18:00:07| Sending loaders\db2010_cid00_prodid_p3k.bin...
18:00:07| This is a PRODUCTION_ID loader
18:00:07| Activating GDFS...
18:00:08| phone name detected
18:00:08| ++++++++++++++++++++++++++++++++++
18:00:08| PHONE INFO
18:00:08| ++++++++++++++++++++++++++++++++++
18:00:08| DBID: db2010
18:00:08| OTP CID: 49
18:00:09| EROM CID: 49
18:00:09| EROM color: Red
18:00:09| IMEI: 35207901xxxxxx
18:00:09| Phone: W300
18:00:09| Operator: AMERICA_2
18:00:09| CDA: CDA102499/100 R6A
18:00:09| Firmware: R9A035
18:00:09| EROM: n/a
18:00:09| ++++++++++++++++++++++++++++++++++
18:00:09| Ready for operation!
18:00:55| Sending loaders\db2010_cid49red_flash_r2a003.bin...
18:00:55| This is a FLASH loader
18:00:55| +++ Now flashing firmware main...
18:00:55| Sending flashfile D:\Alvaro\W300\NUEVA\custom y main fake w300\w300main fake (main falso)\w300_p3k_dcu.49R.ssw
18:00:55| 5 flashblocks
18:00:59| Finishing flash
18:01:19| +++ Sendinging shutdown signal to phone...
18:01:21| Shutting down...
18:11:19| XS++ v1.2 Ready !
18:11:23| Attempting to open the interface...
18:11:23| ++++++++++++++++++++++++++++++++++
18:11:23| Turn off phone
18:11:23| Hold C Button on phone and connect phone.
18:11:23| You have 30 seconds.
18:11:23| ++++++++++++++++++++++++++++++++++
18:11:30| PORT STATUS: ACTIVE
18:11:30| Baseband ID: 8040
18:11:30| Hardware Platform: db2010 Marita compact
18:11:30| Protocol Version: 3.1
18:11:30| Sending loaders\db2010_cid00_prodid_p3k.bin...
18:11:31| This is a PRODUCTION_ID loader
18:11:31| Activating GDFS...
18:11:32| phone name detected
18:11:32| ++++++++++++++++++++++++++++++++++
18:11:32| PHONE INFO
18:11:32| ++++++++++++++++++++++++++++++++++
18:11:32| DBID: db2010
18:11:32| OTP CID: 49
18:11:32| EROM CID: 49
18:11:32| EROM color: Red
18:11:32| IMEI: 35207901xxxxxx
18:11:32| Phone: W300
18:11:32| Operator: AMERICA_2
18:11:32| CDA: CDA102499/100 R6A
18:11:32| Firmware: R9A035
18:11:32| EROM: n/a
18:11:32| ++++++++++++++++++++++++++++++++++
18:11:32| Ready for operation!
18:12:37| Sending loaders\db2010_cid49red_flash_r2a003.bin...
18:12:37| This is a FLASH loader
18:12:37| +++ Now flashing firmware main...
18:12:38| Sending flashfile D:\Alvaro\W300\NUEVA\W300i_R9A036_MAIN_GENERIC_JE_ RED49\W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn
18:12:38| 336 flashblocks
18:15:34| Finishing flash
18:15:34| Done flashing
18:15:35| +++ Now flashing filesystem...
18:15:35| Sending flashfile D:\Alvaro\W300\NUEVA\W300i_R9A036_FS_AMERICA_2_RED 49.fbn
18:15:35| 157 flashblocks
18:17:02| Finishing flash
18:17:02| Done flashing
18:17:02| ++ Flashing was successful
18:17:04| Disconnected... Unplug the phone
18:17:11| Shutting down...
18:17:36| XS++ v1.2 Ready !
18:17:47| Attempting to open the interface...
18:17:47| ++++++++++++++++++++++++++++++++++
18:17:47| Turn off phone
18:17:47| Hold C Button on phone and connect phone.
18:17:47| You have 30 seconds.
18:17:47| ++++++++++++++++++++++++++++++++++
18:17:50| PORT STATUS: ACTIVE
18:17:51| Baseband ID: 8040
18:17:51| Hardware Platform: db2010 Marita compact
18:17:51| Protocol Version: 3.1
18:17:51| Sending loaders\db2010_cid00_prodid_p3k.bin...
18:17:51| This is a PRODUCTION_ID loader
18:17:51| Activating GDFS...
18:17:52| phone name detected
18:17:52| ++++++++++++++++++++++++++++++++++
18:17:52| PHONE INFO
18:17:52| ++++++++++++++++++++++++++++++++++
18:17:52| DBID: db2010
18:17:52| OTP CID: 49
18:17:52| EROM CID: 49
18:17:52| EROM color: Red
18:17:52| IMEI: 35207901xxxxxx
18:17:52| Phone: W300
18:17:52| Operator: AMERICA_2
18:17:53| CDA: CDA102499/100 R6A
18:17:53| Firmware: R9A035
18:17:53| EROM: n/a
18:17:53| ++++++++++++++++++++++++++++++++++
18:17:53| Ready for operation!
18:18:35| Sending loaders\db2010_cid49red_flash_r2a003.bin...
18:18:36| This is a FLASH loader
18:18:36| +++ Now flashing firmware main...
18:18:36| Sending flashfile D:\Alvaro\W300\NUEVA\custom y main fake w300\w300main fake (main falso)\w300_p3k_dcu.49R.ssw
18:18:36| 5 flashblocks
18:18:39| Finishing flash
18:18:42| +++ Sendinging shutdown signal to phone...
18:18:44| Shutting down...

[dante4]

cual version del far utilizas me supongho con sefp yo te recomiendo que uses far con jdflasher

[URBANO]

Por que no flasheas con setool2lite v1.11? es mas censillo para flashear , y para modificar utiliza el XS++ mas censillo que el far.
Maximo Tutorial de Setoolite Todo en Uno Solo

Tutorial Generalizado de SETool2 Lite V1.11

Murió tu teléfono al flashear? Tienes el Error: can't open file C:\...\...? - Top Sony


Añadir Y Borrar Archivos Facilmente con XS++ 3.1 Sin Flashear


saludos.

[macuak]

usa este far no debe darte problemas para entrar al fs usa el scrip jd flasher far en español con jd flasher y sefp ahora si con soporte de cid 53 - Top Sony