[RESUELTO] mi w810 no prende

[levis321]

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906200773996 CERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed:7 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102555/107
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906200773996 CERT:RED
No ack during phoneid
Phone info read error ! PLEASE CHECK MODEL !
Elapsed:58 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906200773996 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "D:\respaldar\flash\SETOOL\setool2lite V1.10\setool2lite V1.10\rest\R4EK001_CXC1250316_GENERIC_HN"
writing C:\Documents and Settings\Administrador\Escritorio\flash\archios\to do_w810\todo w810\W810_R4DB005_MAIN_GENERIC_HN_CID49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:343
Will flash 343 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Administrador\Escritorio\flash\archios\to do_w810\todo w810\W810_R4DB005_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (2048)
customize.xml (726)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
SETT_RINGTONE_HOOK_3.itm (10240)
Phone detached
Elapsed:330 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906200773996 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
writing C:\Documents and Settings\Administrador\Escritorio\flash\archios\to do_w810\todo w810\W810_R4DB005_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
Elapsed:126 secs.





lo hice connlos archivos y despues solocon el fs... sigue igual

[Ivan08v]

Daño en el flash chip amigo....
Llevalo a un tecnico que tiene que realizar un proceso de calentamiento de ese chip para resoldar los contactos internos....
No se soluciona con flasheo el error:
"Can't read SCRC unit"


Suerte

[els_al9113]

si amigo si no pudiste con el flasheo no lo sigas intentando sera perdida de tiempo...

llevalo a un tecnico es lo mejor en estos casos..

[foxito0413]

con el custom te refieres al cda?

si exactamente el cda es el custom

[dmorancho]

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "D:\respaldar\flash\SETOOL\setool2lite V1.10\setool2lite V1.10\rest\R4EK001_CXC1250316_GENERIC_HN"
writing C:\Documents and Settings\Administrador\Escritorio\flash\archios\to do_w810\todo w810\W810_R4DB005_MAIN_GENERIC_HN_CID49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:343
Will flash 343 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Administrador\Escritorio\flash\archios\to do_w810\todo w810\W810_R4DB005_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
lo hice connlos archivos y despues solocon el fs... sigue igual

amigo, no tienes tu archivo REST, por esa razon no prende.

ahi estan los archivos rest
REST FILES

lo colocas en la carpeta rest del setool saludos

[ts002]

intenta con eso Murió tu teléfono al flashear? Tienes el Error: can't open file C:\...\...? - Top Sony cuidado todos antes de postear

[yougi]

si al momento de introducir el main nuevamente no prende te recomiendo volver al flashear supongo que introduciendo bien los archivos tu cel prendera satisfactoriamente pero checalo antes de