me a llegado un w300 cuando lo prendo la pantalla sale en blanco y luego se apaga, cuando lo leo me sale el siguiento log, ademas cuando lo flasheo no termina completamente, algunas ideas
v0.914028/UNI
CARD SERIAL: 00036859
Loaded 51 flash descriptors
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 6 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
Can't load ID loader !
Elapsed: 15 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxCERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed: 4 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3599xxxxxxxxx9 CERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed: 17 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxCERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 10 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:3599xxxxxxxCERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing D:\setool\v0.914028\rest\w300\W300_R4EA031\R4EA031 _CXC1123260_GENERIC_JE
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
Send superblock command NAK
Elapsed: 150 secs.