Prende SOLO UNOS segundos!

[luisito65]

hola esque en algunos intentos por flashear mi z530 creo k lo estropie por que ahora solo cuando lo estoy cargando prende unos 3 segundos y se apaga que sera!!!!! ayuda...

EDITO: ya lo carge unas 8 horas y cuando no esta cargando tambien lo prendo y solo dura unos 2 0 3 segundos.

En EL setool le puse "READ GDSF" y salio esto

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors


Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:300
Found:300 variables
GDFS read all done, GDFS.BIN written
Phone detached
Elapsed:44 secs.