Converti K310a @ w200 pero prende y apaga

[samarca]

HOla!!
Me pueden ayudar?
LO que sucede es que converti mi K310a A w200. yo segui todos los pasos.
Primero me aparecia el mensaje en el cel. Espere y duro mas de media hora y no cargo nada, me puse a nacear y lo flashe varias veces y luego vi los foros en el que faltaba un archivo que es el reset hice lo que me indicaban.
pero ahora da una luz como cuando va a encender y se apaga enseguida parpadea .
Ayudenme me tire el cel.

supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:24 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4HA014 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4HA014
Language Package:AMERICA_2
CDA article: CDA102570/56
CDA version: R4A
Default article: cxc1250474
Default version: R4DA044

Operator: 000-00

USERCODE:0000

Elapsed:6 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:1121
Found:893 variables
Found:228 variables
GDFS read all done, GDFS.BIN written
Phone detached
Elapsed:115 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/16
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
writing C:\sandra\W200_R4HA014_FS_AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (2048)
Customize.xml (1031)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
SETT_RINGTONE_HOOK_3.itm (10240)
Phone detached
Elapsed:184 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
Elapsed:51 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
unsupported combination.
Elapsed:9 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4HA014 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4HA014
Language Package:AMERICA_2
CDA article: CDA102570/56
CDA version: R4A
Default article: cxc1250474
Default version: R4DA044

Operator: 000-00

USERCODE:0000

Elapsed:8 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
unsupported combination.
Elapsed:0 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:40 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
unsupported combination.
Elapsed:5 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:16 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:12 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4HA014 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4HA014
Language Package:AMERICA_2
CDA article: CDA102570/56
CDA version: R4A
Default article: cxc1250474
Default version: R4DA044

Operator: 000-00

USERCODE:0000

Elapsed:14 secs.
Elapsed:14 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35156101407744 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
Restore from:C:\sandra\este es\rest\R4HA014_CXC1250719_GENERIC_ME
Elapsed:147 secs.

[korer]

pues normalmente eso no pasa mira si lo flasheaste via Setool 2lite en "add" vuelve a agregar la main y fs y en misc files el CDA comprimido en zip, veras que asi arranca

[Sarik]

pues si! correctamente, sigue las instrucciones dadas, a lo mejor subiste la main mal, recuerda que es "flash" no otro, por que por lo general nunca para flashear te pide sacar la pila

[vip412]

bueno amigo primero no pongas nunca tu imei aqui ya que se presta para muchas cosas!!!!segundo haz todo de nuevo en donde dice ADD pones la fs y main ojo que corresponda a tu firmaware y en misc files subes el cda comprimido en zip nunca subas nada comprimido en rar.... y con eso deberia funcionar

[samarca]

Gracias pero no entiendo.ya he visto eso en varios foros, pero cual es ese main y fs y el CDA.
Explicame por fa.
Te agradesco de todo corazon!!!

[Lilbebo]

mira el Se Tool 2 Lite esta muy facil y practico de usar.
fijate bien los pasos si los hiciste correctaente, y si insertaste bien los diferentes archivos.

Suerte!!

[Ivan08v]

Pegale una leida a los tutoriales entes de flashear:
Maximo Tutorial de Setoolite Todo en Uno Solo
Tutorial Generalizado de SETool2 Lite V1.11
VideoTutoriales: SeTool 2 Lite
Soy nuevo,como flasheo?dudas y errores


Saludos