Error al read GDFS

[Senium]

A mí teléfono no le ocurrió nada en los flasheos... lo flashee cerca de 15 veces sin tener el BackUp todavía

Me puse a leer otros post's y ese error es a causa de una falla en el Flash Chip (No tiene nada que ver con Softwares), según el FAQ del SeTool el error significa ésto;

Q:
i trying to service w810/w300/z530/z550/k310/k510 phone and getting
such result
Code:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
ldr_on_ldr hdr no ack,err:10

what to do ? phone was working before !!! (variant: phone was dead before)

A:

that is hardware problem and nothing to do with software. usually it is bad soldered flash chip.
latest mid-range semc phones quality is below zero.

as last resort, you can try to raise voltage on FLASH VPP upto 12v
(for start, try to flash it with dcu60, it also has increased voltage)

but what say to customer if phone works before servicing?
have no idea - think yourself- that is risk that you including in each service cost.
sadly, but such thing can be happened - flash sector can read good, but fails on erase/write.

Dice que lo más probable es que el Flash Cip esté desoldado, pero puedes intentar calentandolo con una pistola de calor,

Sino, llévalo al técnico..
Saludos