VKP equivocado?

[SEW610]

hola a todos pues miren acabo de subir un parche a mi celular el rpoblema es que al tratar de encender el celular nop prende, ni siquiera el led es un W610 miren asi paso inicie setool 1.1 le dia "by pas security DB2020" y seleccione el parche de camara 5mp y le di flash! pero al desconectar el telefono ya no prende!! por favor estoy desesperado agradesco cualquier aporte pero ayuda!!

esto es lo que decia setool

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401636965 CERT:RED
FLASH CID:52 COLOR:RED

Model:W610i
Brand:Sony Ericsson
MAPP CXC article: R6BC002 prgCXC1250747_GENERIC_NA
MAPP CXC version: R6BC002
Language Package:AMERICA_2
CDA article: CDA102568/107
CDA version: R8A
Default article: cxc1250755
Default version: R6BC002

Network LOCKED
Operator: 334-02

Elapsed:4 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401636965 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401636965 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\!!«adr!aN»!!\Mis documentos\W610¡\camara 5MP.vkp
VKP script loaded OK. Lines: 247
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45740000
New block #0001 added: $457C0000
New block #0002 added: $458C0000
Blocks selected OK. Reading blocks: 3
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
VKP script executed OK
Elapsed:1477 secs.

[masteraire]

Hola mira flashea solamente el main!!

[ts002]

pues flashea el puro main o simplemente buelve a quitar ese parche si persiste solo main suerte,

[SEW610]

miren cuando hago "identify" sale esto

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715401636965 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting

[ts002]

pues flashea puro main amigo eso lo solucionara suerte.

[SEW610]

pero al hacer un identify ni siquiera lo lee!!!ayuda por favor!!!

[masteraire]

Hola has lo que dice HATRED flashea el main es que se daño tu main solo flashealo y se resuele tu problema aunque te marque ese error a agrega el main en file y le das flash!!

[Theadrian]

pues si, flashear el main sera la solucion, pero di adios a tus 26 parches jeje.. suerte man

[SEW610]

pero diganme!! ni siquiera setool lo lee

[dmorancho]

si fue por el patche, solo flashea el MAIN ya te dijero, no le hagas identify