Resultados 1 al 6 de 6

Ver modo hilado

  1. #3
    Avanzado
    Fecha de ingreso
    26/nov/2007
    Ubicación
    mexico d.f.
    Móvil
    -z550
    Mensajes
    160

    Re: otro w600 ayuda

    gracias amigo christiam este es el post del procedimiento que me dijiste lo cambie a red.
    System diagnostics passed.
    Version 12.00 ready!

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Brown
    Flash certificate: A1_DB2010_49_BROWN
    Trying Brown CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x890D
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
    Analyzing configuration...
    Reading primary certificate...
    Primary certificate CID: 49
    Primary certificate color: Brown
    Secondary certificate not found.
    GDFS configuration found.
    OSE configuration found.
    TestProgram configuration not found.
    Analysing GDFS...
    Done.
    RSA protection is normal.
    Phone hardware initialized OK

    [ --- Change Certificate Color --- ]
    Analyzing firmware...
    Preparing to program flash...
    Baudrate = 921600Bd
    Programming flash...
    Primary certificate has been overwritten.
    Time: 00:00:02
    Flash process done.
    Turning off phone...
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x890D
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Flash Main Firmware --- ]
    Flash file: "W600i_CXC1123106_NAM1_R7B039_Brown49.cw6sw"
    Waiting for flash file to load...
    Preparing to program flash...
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...

    [ --- Detach Phone --- ]
    Terminating threads...
    All threads terminated.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x890D
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Unlock RSA --- ]
    Preparing to program flash...
    Baudrate = 921600Bd
    Programming flash...
    Time: 00:00:00
    Flash process done.
    Phone automatically detached.

    [ --- Attach to Phone --- ]
    Connecting via UC-10 Universal Cable...
    Powering on the phone...
    Baseband chip ID: 0x8040
    Protocol version: 3.1
    Baudrate = 460800Bd
    Booting via ROM...
    Sony Ericsson phone detected.
    Phone CID: 49
    Phone color: Red
    Flash certificate: A1_DB2010_49_RED
    Trying Red CID49 flash applet...
    Sending applet prologue...
    Sending applet body...
    Time spent entering bootstrap: 1s
    Initializing phone hardware...
    Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
    Flash manufacturer: Intel
    Flash ID: 0x890D
    OTP Security Level: 1 (Retail)
    OTP CID: 49


    Sending applet...
    Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
    RSA protection state cannot be determined for this CID.
    Phone hardware initialized OK

    [ --- Flash Main Firmware --- ]
    Flash file: "W600i_CXC1123106_NAM1_R7B039_Brown49.cw6sw"
    Waiting for flash file to load...
    Preparing to program flash...
    Defeating RSA protection...
    Waiting for the phone to turn off...
    Should the communication hang, reinsert battery.
    Baudrate = 460800Bd
    Sending applet prologue...
    Sending applet body...
    Waiting for acknowledge...
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
    Initializing applet...
    Baudrate = 460800Bd
    Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
    Defeated!
    Sending applet...
    Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
    Sending applet...
    Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
    Baudrate = 921600Bd
    Programming flash...
    RSA protection was set back to normal.
    Time: 00:06:07
    Flash process done.

    [ --- Flash Raw File System --- ]
    Flash file: "W600i_CXC1123107_All-in-One_CustomV1_R7B039_Brown49.cw6fs"
    Waiting for flash file to load...
    Reading phone RSA certificate...
    Preparing to program flash...
    Analysing flash file...
    Programming flash...
    Time: 00:04:52
    Flash process done.

    [ --- Customize File System --- ]
    Sending CS applet...
    The applet ignored baudrate change request!

    [ --- Turn off Phone --- ]
    Turning off phone...
    y el error que me da es este
    no response for applet
    invalid response.
    Última edición por kronosmx; 28/03/2008 a las 21:34:54

Información de tema

Usuarios viendo este tema

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

Temas similares

  1. Otro post de ayuda [w760i]
    Por mkirap en el foro A2Uploader
    Respuestas: 1
    Último mensaje: 15/04/2009, 11:50:13
  2. Ayuda con mi w600 [Parche sysfgx w600]
    Por _ikari en el foro Parches & Scripts
    Respuestas: 6
    Último mensaje: 28/11/2008, 22:12:44
  3. ayuda con otro k790
    Por chrisbond en el foro Se Tool 2 Lite
    Respuestas: 36
    Último mensaje: 21/07/2008, 14:26:12
  4. como desbloqueo mi cel para poner otro chip de otro operador?
    Por jens87 en el foro Telefonos Moviles
    Respuestas: 11
    Último mensaje: 20/07/2008, 18:26:21
  5. [AYUDA] Juegos y aplicaciones de un celular a otro
    Por MOJOJOJO en el foro Software y Conexion a la PC
    Respuestas: 2
    Último mensaje: 14/06/2008, 02:14:52

Etiquetas para este tema

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •