logs w810

System diagnostics passed.
Version 13.01 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK


el identify solo tira esto

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying SEMC ID applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 070129 1112 NGUCXC125872_DB2010_PRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49


Turning off phone...
Terminating threads...
All threads terminated.

bueno, el telefono deja metele el main y el fs, pero cuando voy a meter el custom me tira el siguiente error

[ --- Customize File System --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...

No response
This may indicate damaged EROM area!
This seems pretty bad...

ay algo que se pueda hacer?

ahora con un z310, no enciende, no lo attach la cruiser, ala hora que pruebo con el cable usb, usando las teclas 2 y 5 o la c, una luz roja por el infrarojo se enciende y apaga, se quita hasta cuando quito la bateria, igual pasa cuando intento attach con la cruiser se enciende el foquito...

yo pienso que talvez las placas o tarjetas logicas estan dañadas, me gustaria saber si se podrian recuperar usando TP...

gracias...