[RESUELTO] w610/k550 BrAzzUkA's (master clock)

[rokoloko]

aver, lo encontre en otro foro y no le entendi bien, alguien sabe que quiso decir? ya que el brazzuka camdriver esta en 100 kHz.. esta bien? o que?

Aqui lo que dijo:

For modders who copied the property cam_i2c_clock_fr of the driver for w610/k550 BrAzzUkA's. We made a mistake in relation to the parameters of registers.
apologize for mistake.

The property only worked with these registers in most models chip camera phone

Fix correction register

cam_i2c_clock_freq=[2]; // I2C frequency in kHz
// [0] => 433 kHz
// [1] => 325 kHz (but not supported for all models)
// [2] => 100 kHz
// all other Values => 100 kHz => default

reg[0]=>support to 433khz
reg[1]=>support to 325khz
reg[2]=>support to 100khz

All values are in hexa but follows a diagramm blocks