y ya que flasheo solo el main que pasa? no hago nada mas? y en caso de que le pusiera una gdfs diferente el telefono estaria muerto para siempre? no habria forma de recuperarlo? o si existen otros metodos?(no le eh metido ninguna otra gdfs solo es una duda) o a que cables te refieres?

bueno mira al flashear el puro main aparecio esto


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100683243 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
can't open file "C:\Users\KIRINO\Documents\SPLINEN\Celular\K79 0 320x240\Flasheo k790\setool2 lite 1.8\rest\R4DB005_CXC1250316_GENERIC_HN"
writing D:\Documents and Settings\KIRINO\Escritorio\W810\W810_R4DB005_MAIN_ GENERIC_HN_CID49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:343
Will flash 343 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
verify block error
last blk:45600000,00010000
Elapsed:426 secs.