w800i

[AlexR18]

hola que tal amigos estaba flasheando este w800 y salio esto creen que sea creen que faltee el rest de ser asi donde lo encuentro el el soporte no esta ni en los originales ni aki en las descargas saludos

v0.914024/UNI
CARD SERIAL: 00032426
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301674345 CERT:RED
FLASH CID:49 COLOR:RED

Model:W800i
MAPP CXC article: R1BC002 prgCXC1250092_EU_1_CA
MAPP CXC version: R1BC002
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250093
Default version: R1BC002
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R1BC002_CXC1250092_EU_1_CA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed: 6 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

MODEL:W800i
CDA: CDA102425/12
CDA REV: R6A
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301674345 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BC002_CXC1250092_EU_1_CA
Restore from:R1BC002_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\Setool3\Mis documentos\v0.914020\rest\R1BC002_CXC1250092_EU_1_ CA"
writing C:\Documents and Settings\Setool3\Escritorio\W800_R1BC002_MAIN_EU_1 _CA_RED49\W800_R1BC002_MAIN_EU_1_CA_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
verify block error
last blk:00000000,00000000
Elapsed: 407 secs.

[GatoHern90]

intenta con otro main por que con este te aparece esto:

writing C:\Documents and Settings\Setool3\Escritorio\W800_R1BC002_MAIN_EU_1 _CA_RED49\W800_R1BC002_MAIN_EU_1_CA_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
verify block error

Tienes un error al cargar el Bloque 291 del main, no se cuantos bloques tiene este teléfono, pero si no carga el main completo jamas te va a funcionar

no tiene nada que ver con el rest o por lo menos no hasta el momento

intenta con otras versiones del main a ver que tal

[gabrielw]

hola que tal amigos estaba flasheando este w800 y salio esto creen que sea creen que faltee el rest de ser asi donde lo encuentro el el soporte no esta ni en los originales ni aki en las descargas saludos

v0.914024/UNI
CARD SERIAL: 00032426
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301674345 CERT:RED
FLASH CID:49 COLOR:RED

Model:W800i
MAPP CXC article: R1BC002 prgCXC1250092_EU_1_CA
MAPP CXC version: R1BC002
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250093
Default version: R1BC002
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R1BC002_CXC1250092_EU_1_CA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed: 6 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

MODEL:W800i
CDA: CDA102425/12
CDA REV: R6A
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL

Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167301674345 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BC002_CXC1250092_EU_1_CA
Restore from:R1BC002_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\Setool3\Mis documentos\v0.914020\rest\R1BC002_CXC1250092_EU_1_ CA"
writing C:\Documents and Settings\Setool3\Escritorio\W800_R1BC002_MAIN_EU_1 _CA_RED49\W800_R1BC002_MAIN_EU_1_CA_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
verify block error
last blk:00000000,00000000
Elapsed: 407 secs.

te vota ese error por que el main no es el correcto busca otra version

[AlexR18]

que tal ya quedo solucionado solo cambie el main le puse el de un w700 y jalo aunque ahi en el setool me decia w800
bueno cierro post