Ayuda con este telefono w580

[welfreng]

Hola amigos mi problema es el siguiente..me llego un w580 el cliente me dijo que lo estaba cargando y cuando le quito el cargador no encendio mas..he intentado flashearlo y no se ha dejado flashear...sale el siguiente error...


v0.914023/UNI
CARD SERIAL: 00048333
Loaded 51 flash descriptors
Connecting to UFS...
Found 1 FTDI device(s).
Can't detect any UFS boxes.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301571389 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301571389 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

bypassing security...
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:474 secs.

[ncoolsoft]

Eso es que debe tener la Erom dañada, revisa si al intentarlo prender se coloca "red blikind" osea que se te enciende una luz roja en la parte lateral del telefono... si es asi dejame decirte que el telfono esta grave.

Saludos

[MaxDamage]

postea un identify usando cable usb.

[CheloDj.]

yo tengo el mismo problema esto me aparese con el cable usb

v0.914023/UNI
CARD SERIAL: 00035608
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:1 secs.

[ncoolsoft]

es cierto tambien me sucedio algo parecido con un W850, alguien que diga cuando sale este error, que hay que hacer para repararlo o solucionarlo?

SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE


Saludos

[AlexR18]

solo dale unlock y luego lo flasheas saludos

[CheloDj.]

con el cable que conecta la setool me muestra esta informacion.

v0.914023/UNI
CARD SERIAL: 00035608
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:1 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package:AMERICA_2
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002
PROVIDER: 000-00
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:4 secs.

[CheloDj.]

al tratar de desbloquiarlo via pach con el cable de la box llega hasta aki.

v0.914023/UNI
CARD SERIAL: 00035608
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:1 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package:AMERICA_2
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002
PROVIDER: 000-00
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:4 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSCA UNLOCK ONLY SUPPORTED ON DCU60 !
Elapsed:6 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
SERVER SUPPORT ENABLED.
RECOVERY MODE STARTED
DB2020 EROM UPGRADE STARTED

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSCA UNLOCK ONLY SUPPORTED ON DCU60 !
Elapsed:9 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
Open COM port OK
OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Send subblock NAK
CID52 BYPASS PROCEDURE FINISHED

Elapsed:222 secs.

[hyber_99]

OTP LOCKED:1 CID:51 PAF:1 IMEI:35714301708425 CERT:N/A
FLASH CID:52 COLOR:RED

@INTERCELULAR el equipo es Cid52, y el foro es para setool y no es problema de Erom
saludos

Send subblock NAK
CID52 BYPASS PROCEDURE FINISHED

Elapsed:222 secs.

@CheloDj parece problema de hardware, talvez este mojado.
dale una limpieza e intentalo otra vez
saludos

[luzer]

BOOTROM MODE DETECTED

Primero flashealo sin alt bypass, en modo normal (presionando 'C') o cable COM

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !

Segun el mensaje el EROM y posiblemente la GDFS estan corruptas, si fuese asi, no hay nada que se pueda hacer con software