Intenta cargar la GDFS con Phone XS.
A mi me paso algo parecido, y me anduvo mejor cargar el mismo backup con Phone XS.
Busca en el foro que hay un instructivo, ahora no me acuerdo donde esta.
Intenta cargar la GDFS con Phone XS.
A mi me paso algo parecido, y me anduvo mejor cargar el mismo backup con Phone XS.
Busca en el foro que hay un instructivo, ahora no me acuerdo donde esta.
cuando te pida que enchufes el cable y c , a demas de hacer eso, mantené presionadas las teclas 2 y 5. capas que ahi te lo reconoce
si te ha servido agradéceme
Hola muchas gracias a todos pero ahora mientras cargaba el firmware a dado este nuevo error.
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/16
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102570/22
CDA version: R8A
Default article: cxc1250474
Default version: R4DA044
Network LOCKED
Operator: 214-03
USERCODE:0000
Elapsed:32 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:18 secs.
Abort all operations.
Can't load id loader !
Elapsed:18 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102570/22
CDA version: R8A
Default article: cxc1250474
Default version: R4DA044
Network LOCKED
Operator: 214-03
USERCODE:0000
Elapsed:7 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
writing C:\Documents and Settings\Usuario\Escritorio\MOVIL\K310\K310_R4EA03 1_FS_MEDITERR_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:117
Will flash 117 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Usuario\Escritorio\MOVIL\K310\K310_R4EA03 1_MAIN_GENERIC_DO_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:304
Will flash 304 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Send subblock NAK
Send subblock NAK
Elapsed:557 secs.
He acabado parandolo yo mismo porque solamente salian errores y no seguia.
Ayuda por favor
GRACIAS
Hola, serviria de algo intentar poner la erom aunque nose si podría porque no consigo ahora despues de esto que los programas me reconozcan el movil...
AYUDA PORFAVOR
GRACIAS
Última edición por jesuslg123; 17/12/2007 a las 19:05:38 Razón: Mensaje combinado automaticamente
Hola, a mi me paso jsto lo mismo, alguien sabria solucion para ello???
Gracias de ante mano.
ustedes quieren flashearlo a w200? prueben subiendole los archivos nuevamente y con la bateria al 100% y siguiendo el tutorial de flasheo: http://www.topsony.com/forum_es/showthread.php?t=28726
no se guien por las imagenes porque estan desordenadas, mejor sigan los puntos, paso a paso.
si te ha servido agradéceme
Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)
Marcadores