Hola a todos, tengo un problemilla a ver si alguien me lo puede solucionar o decir algo. Despues de varios muchos intentos consegui meter más temas flash (los que hay en el tutorial) pero ahora intento volver ha hacerlo (meter más temas, cambiar iconos etc..)) y el programa no me deja, empieza a entrar en un bucle que no acaba nunca, es decir hace esto:
Phone-XS GUI Build V2.01 Beta Ready!
System Diagnostics check: OK!
Hold 'C' and connect cable to phone. You have 30seconds...
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
sending loaders\db2010_cid00_prodid_p3h.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 6532 bytes
Wait for EaTEbS
QD00 Payload 35432 bytes
Wait for EdQ
060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
This is a PRODUCTION_ID loader
***** Read flash vendor & id (cmd 0D)
Binary answer is: 0a (2019)
***** Read OTP (cmd 24)
Closed: 1
CID : 49
PAF : 1
IMEI : 35906100xxxxxx (SonyEricsson W810i)
***** Read EROM (cmd 57)
Color : 04 (red)
long2 : ff
CID : 49
***** Read OTP (cmd 24)
Closed: 1
CID : 49
PAF : 1
IMEI : 35906100xxxxxx (SonyEricsson W810i)
***** Read EROM (cmd 57)
Color : 04 (red)
long2 : ff
CID : 49
***** Authentication challenges are saved to authresponses_0.bin
***** CS_LOADER
binary sending loaders\db2010_cid49red_cs_r5a.bin
Header
Prologue 6520 bytes
Payload 478225 bytes
060302 1655 LIECXC1327364_COMPACT_SEMC_CS_LOADER__R5A
This is a CS loader
***** Loader activation (cmd 01-09)
Binary answer is: 01-ff err=00
***** GDFS activation (cmd 04-05)
Binary answer is: 04-ff err=00
***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
Binary answer is: 04-ff err=1e
This loader is LOCKED (errorcode=30)
***** FS activation (cmd 03-12)
Binary answer is: 03-ff err=00
***** Auth startup (cmd 05-50)
Binary answer is: 05-02 (4500)
***** AuthA (cmd 05-42) hacking
500...
1000...
1500...
2000...
2500...
3000...
3500...
4000...
...4200
Matches: 0:0003906, 1:000294, 2:0000, 3:0
Totals : 0:0003906, 1:000294, 2:0000, 3:0
Theory : 0:0003937, 1:000261, 2:0001, 3:0
***** Reset (cmd 01-0C)
Waiting for the phone to disconnect
Waiting for the phone to reconnect
y ahi vuelve al principio otra vez, luego hace lo mismo y otra vez a empezar, alguien sabe porque o que pasa??
Muchas gracias.
Marcadores