Murio mi W810i usando SETOOL2

[xtsys]

aqui esta el log de lo que hize:
creo que problema viene desde aqui, haber que opinan:
1.- aqui supuestamente hize un respaldo de la GDFS:

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.0
Loaded 51 flash descriptors
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
phone pre-boot failed,possible RECOVERY needed.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.

2.- Luego esto:
welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.0
Loaded 51 flash descriptors
Will backup GDFS now.

3.- Miren:
welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.0
Loaded 51 flash descriptors
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:633 secs.


4.- Todo esto pensando que he hecho el respaldo de la GDFS:

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.0
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3546???????????? CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
Starting to process VKP patch script: C:\Documents and Settings\Usuario\Escritorio\MoreDownload\Parches W810\Parches W810\continue_radio_playing_you_unplug_headsets_w8 10_r4ea031.vkp
VKP script loaded OK. Lines: 8
Patch structure created OK. Determining blocks to read...
New block #0000 added: $455C0000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:69 secs.

5.- y finalmente observen lo que dice aca:

welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.0
Loaded 51 flash descriptors
Will backup GDFS now.
Abort all operations.
***phone pre-boot failed,possible RECOVERY needed***.
Elapsed:38 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3546???????????? CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:51 secs.

y en ese proceso vi la advertencia del setool2 que decia: "Some patch values differ" y como les conte anteriormente, cuando vi esto me asuste y no se que escoji. Muchachos siento una sensacion de susto en el estomago que no se imaginan

ahora me doy cuenta que el backup de la GDFS nunca se hizo, al menos completo porque el que tengo tiene 2k solamente lo que quiere decir que no tengo respaldo.. o sea que esto esta complicado. Tiene solucion mi pobre SE W810i