Cruiser Plus V13.01 - Unlock DB2020 CID52 GRATIS

[gamenetwork2007]

no, es que justamente,
si se desbloquea por parche, al flashearlo pierdo el desbloqueo,
y justamente @verdolaga dice que no es por parches, por lo tanto si lo flasheo no volveria a bloquearse..
Por eso estoy preguntando, porque no quiero correr el riesgo despues, necesito que por favor me digan aquellos que saben realmente, (no es de mala persona jeje, solo salio asi porque no tenia otra forma de decirlo)

gracias y saludos

Que tal, es liberacion por parche (patch unlocking) osea que si flasheas va a volverse a bloquear mira aqui y tambien te dejo los pasos:
cruiserlogs.net

[verdolaga]

se desbloquea el rsa , reflasheo del main firmware, direct unlock,, listo,,,,,,,,, no hay path,, no se pierde informacion del telefono (fotos, musica, etc..),,,, saludos......

[Roneth]

para el desbloqueo se puede utilizar el cable que biene con el telefono o es uno especial?

[nafg]

para desbloquear gratis es el mismo proseso de siemrpe

cable usb osea DCU60

ver la vercion del software

tienes que ver la vercion del software de tu telefono para cuando flashees el main sea la misma vercion que tenia .

conectar el telefono con C

-unlock rsa (ahora este proseso demora 5 minutos y te pedira desconetar la bateria 2 veces) ya no descontara creditos logs es gratis
-flash main (con la misma vecion que ya tenia antes)
-direct unlock

si no flashea el main con la misma vercion que tenias tendras que flashear main , fs y cutomisar ...



aca el proseso de un k790 cid51 pasado a ci52 desbloqueado y flasheado a R6BC002 todo en 1 proseso:

System diagnostics passed.
Version 13.01 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 51
Phone color: Red
EROM version: R3A016
Trying CID51 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061201 1554 NPA4_CXC1329130_DB2020_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 51
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Modify GDFS --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Upgrading to CID52...
Done.

[ --- Finalize GDFS --- ]
Turning off phone...
GDFS access terminated.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 52
Phone color: Red
EROM version: R3A016
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Programming flash...
Time: 00:00:20
Flash process done.
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
Sending CS applet...
Applet ID: 070125 1328 GENCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Connecting to server...
Connection established, checking server status...
Server version: 2.30
Generating witness...
Your ID: user_EB424C7F
Number of preceding users: 0
Credit: 5
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:04
Removing RSA lock...
Restarting phone...
Connect the phone while holding its C button!
Sending applet...
Sending applet prologue...
Sending applet body...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
Preparing to program flash...
Programming flash...
Time: 00:03:25
Flash process done.
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Waiting for acknowledge...
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 070516 0311 CRU4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 070516 0201 CRUCXC1329134_DB2020_PR...
Done.

[ --- Flash Main Firmware --- ]
Flash file: "K790i_CXC1250477_Generic_R6BC002_Red52.ck79sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:03:53
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K790a_CXC1250491_America2_R6BC002_Red52.ck79f s"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:47
Flash process done.

[ --- Direct Unlock --- ]
Analyzing firmware...
Preparing for direct unlock...
Processing...
Status: Success [O]
Creating firmware backup file...
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
If the phone cannot be turned on anymore, report its type and firmware version.
Starting up GDFS service...
Unlocking phone...
Recalculating CRCs...
Done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 061114 0304 CRUCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/107
Done.
Writing CDA Version MS string...
New value: R4A
Done.
Writing Default Article MS string...
New value: cxc1250491
Done.
Writing Default Version MS string...
New value: R1KG001
Done.
Writing langpack string...
New value: AMERICA_2
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

saludos
nafg

[Gatito22]

para desbloquear gratis es el mismo proseso de siemrpe

cable usb osea DCU60

ver la vercion del software

tienes que ver la vercion del software de tu telefono para cuando flashees el main sea la misma vercion que tenia .

conectar el telefono con C

-unlock rsa (ahora este proseso demora 5 minutos y te pedira desconetar la bateria 2 veces) ya no descontara creditos logs es gratis
-flash main (con la misma vecion que ya tenia antes)
-direct unlock

si no flashea el main con la misma vercion que tenias tendras que flashear main , fs y cutomisar ...



aca el proseso de un k790 cid51 pasado a ci52 desbloqueado y flasheado a R6BC002 todo en 1 proseso:

System diagnostics passed.
Version 13.01 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 51
Phone color: Red
EROM version: R3A016
Trying CID51 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061201 1554 NPA4_CXC1329130_DB2020_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 51
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Modify GDFS --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Upgrading to CID52...
Done.

[ --- Finalize GDFS --- ]
Turning off phone...
GDFS access terminated.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 52
Phone color: Red
EROM version: R3A016
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Programming flash...
Time: 00:00:20
Flash process done.
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
Sending CS applet...
Applet ID: 070125 1328 GENCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Connecting to server...
Connection established, checking server status...
Server version: 2.30
Generating witness...
Your ID: user_EB424C7F
Number of preceding users: 0
Credit: 5
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:04
Removing RSA lock...
Restarting phone...
Connect the phone while holding its C button!
Sending applet...
Sending applet prologue...
Sending applet body...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
Preparing to program flash...
Programming flash...
Time: 00:03:25
Flash process done.
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Waiting for acknowledge...
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 070516 0311 CRU4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 070516 0201 CRUCXC1329134_DB2020_PR...
Done.

[ --- Flash Main Firmware --- ]
Flash file: "K790i_CXC1250477_Generic_R6BC002_Red52.ck79sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:03:53
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K790a_CXC1250491_America2_R6BC002_Red52.ck79f s"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:47
Flash process done.

[ --- Direct Unlock --- ]
Analyzing firmware...
Preparing for direct unlock...
Processing...
Status: Success [O]
Creating firmware backup file...
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
If the phone cannot be turned on anymore, report its type and firmware version.
Starting up GDFS service...
Unlocking phone...
Recalculating CRCs...
Done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 061114 0304 CRUCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/107
Done.
Writing CDA Version MS string...
New value: R4A
Done.
Writing Default Article MS string...
New value: cxc1250491
Done.
Writing Default Version MS string...
New value: R1KG001
Done.
Writing langpack string...
New value: AMERICA_2
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

saludos
nafg

Hola ! No Puedo Flashar un W710i No me lo Reconoce ! que Puede ser que este Mal ! Gracias ! se puede Flashar un Z310i

[nafg]

Hola ! No Puedo Flashar un W710i No me lo Reconoce ! que Puede ser que este Mal ! Gracias ! se puede Flashar un Z310i

puede ser muchas cosas tienes que revisar paso por paso para descartar el problema. primero que cable usas, usb o cruiser? , el cable que usas funciona en otro telefono? el conector de tu telefono esta limpio ? .la beteria de tu telefono esta con carga apropiada? checa estas opciones y nos avisas

z310 si se puede flashear usa el cable usb .

saludos

nafg

[__III_FENIX_III__]

nuca eh liberado un SE solo motorolas no podrian poner un tutorial es que en si no entiendo muy bien el Cruiser
amigos quien me puede ayudar abro cruiser y nomas conecto mi cel o donde tengo mover quien me puede ayudar con eso

[verdolaga]

amigo el log de nafg muestra todo el procedimiento de actualizacion de cid y desbloqueo del movil ,, saludos................

[rewell]

Una duda creen que funcione con el Firmware W580_R8BA024_MAIN_ORANGE_LA_RED52 y W580_R8BA024_FS_ORANGE_GEN_RED52 para w580

Saludos y de antemano gracias

[gamenetwork2007]

Una duda creen que funcione con el Firmware W580_R8BA024_MAIN_ORANGE_LA_RED52 y W580_R8BA024_FS_ORANGE_GEN_RED52 para w580

Saludos y de antemano gracias

Funciona para todos los DB2020 cid 52 de cualquier operadora. Probado

lo baje y todo pero mi computadora no lo detecta o el programa alguien puede decirme como se pone saludos

Necesitas la caja o la dongle cruiser es gratis si es que tienes alguna de las 2 opciones anteriores. Si es que tienes cruiser nada mas instalas el 13.01 y ya funciona bien.