[RESUELTO] Problema W810i

[danielw810]

Alguien me podria ayudar con esto.

08:54:55| XS++ v2.2 Ready !
08:54:55| Executed on Microsoft Windows XP
08:55:01|
08:55:01| Attempting to open the interface...
08:55:01|
08:55:01| Turn off phone
08:55:01| Hold 'C' button on phone and connect phone.
08:55:01| You have 30 seconds.
08:55:01|
08:55:08| Baseband ID: 8040
08:55:08| Hardware Platform: DB2010 Marita compact
08:55:08| Protocol Version: 3.1
08:55:08|
08:55:08| Sending db2010_cid00_prodid_p3l.bin...
08:55:08| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
08:55:08| This is a PRODUCTION_ID loader
08:55:08| Activating GDFS...
08:55:09| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:dani)
08:55:09| ...using IMEI name
08:55:09|
08:55:09| Profiling SEMC phone...
08:55:09| Baseband ID: DB2010
08:55:09| OTP CID: 49
08:55:09| EROM CID: 49
08:55:09| EROM Color: Red
08:55:09| IMEI: 35462301xxxxxx
08:55:09| Phone ID: W810
08:55:09| Network: AMERICA_2
08:55:09| CDA: CDA102555/107 R2A
08:55:09| Firmware Version: R4EK001
08:55:09| EROM: n/a
08:55:09| Ready for operation!
08:55:37|
08:55:37| Sending db2010_cid49red_flash_r2a003.bin...
08:55:37| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
08:55:37| This is a FLASH loader
08:55:37| Now flashing firmware main...
08:55:38| Flashing c:\documents and settings\administrador\escritorio\w810\firmware\ma in\w810_r4ek001_main_generic_hn_red49\w810_r4ek001 _main_generic_hn_red49.mbn
08:55:38| Header type: BABE
08:55:38| 344 flashblocks
08:58:15| Binary acknowledge failed with: 13
08:58:15| Command: Error 0x13
08:58:15| Failed sending flashblock 323. Returnvalue 0x0
08:58:15| Finishing flash
08:58:16| Binary acknowledge failed with: 01
08:58:16| Failed
08:58:16| Failed

trate con setool2lite v1.08 y me aparece esto...

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35462301881564 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
writing C:\Documents and Settings\Administrador\Escritorio\W810\Firmware\MA IN\W810_R4EK001_MAIN_GENERIC_HN_RED49\W810_R4EK001 _MAIN_GENERIC_HN_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:344
Will flash 344 blocks...
ldr blk write fail. fatal
Abort all operations.
Send subblock NAK
Elapsed:154 secs.
phone pre-boot failed,possible RECOVERY needed.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:80 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:12 secs.

Ayer entre con far y luego de aplicar la main no me ha encendido el telefono, quiero pensar que se descargo la bateria, desde ya gracias.

Saludos.