hola amigos tengo un problema con un w300 espero me puedan ayudar , me pasa lo siguiente :System diagnostics passed.
Version 12.10 ready!
[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W300i_CXC1123260_Generic_R9A036_Red49.cw3sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Error flashing block at address: 0x44810000
Script error: Flash error [12.10.78]
se me queda como al 35% y se para el flash y lo intento e intento y me vuelve a salir lo mismo ¡
se agradece toda la ayuda posible .:41:
Marcadores