hola alguien me puede ayudar tengo un w200i con Firmware v R4HA014 y quiero liberarlo con la cruiser v 13.01 pero no me da la opcion en la pestaña de locks lo he conectado con el cable usb y rj45 y me muestra esto:
System diagnostics passed.
Version 13.01 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID50 flash applet...
Trying Red CID51 flash applet...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone hardware initialized OK

es normal que me muestre esto o tengo que liberarlo con logs o credito bueno quisiera saber si puedo o no con mi cruiser liberarlo saludos