AYUDA!!, no enciende despues de flashearlo W300i

[jploaiza]

esto aparece al conectar el equipo

11:47:59| XS++ v1.2 Ready !
11:48:07| Attempting to open the interface...
11:48:07| ++++++++++++++++++++++++++++++++++
11:48:07| Turn off phone
11:48:07| Hold C Button on phone and connect phone.
11:48:07| You have 30 seconds.
11:48:07| ++++++++++++++++++++++++++++++++++
11:48:11| PORT STATUS: ACTIVE
11:48:11| Baseband ID: 8040
11:48:11| Hardware Platform: db2010 Marita compact
11:48:11| Protocol Version: 3.1
11:48:11| Sending loaders\db2010_cid00_prodid_p3k.bin...
11:48:11| This is a PRODUCTION_ID loader
11:48:11| Activating GDFS...
11:48:12| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W300)
11:48:12| ...using GDFS name
11:48:12| ++++++++++++++++++++++++++++++++++
11:48:12| PHONE INFO
11:48:12| ++++++++++++++++++++++++++++++++++
11:48:12| DBID: db2010
11:48:12| OTP CID: 49
11:48:12| EROM CID: 49
11:48:12| EROM color: Red
11:48:12| IMEI: 35647601xxxxxx
11:48:12| Phone: W300
11:48:12| Operator: AMERICA_2
11:48:12| CDA: CDA102499/96 R7A
11:48:12| Firmware: R4EA031
11:48:12| EROM: n/a
11:48:12| ++++++++++++++++++++++++++++++++++
11:48:12| Ready for operation!
11:50:28| +++ Sendinging shutdown signal to phone...
11:50:28| +++ Done.. You may now connect again...
11:50:28| Shutting down...


lo raro esque sin el chip, no me lo toma el pc y cuando lo toma aparece solo que el puerto se ha abierto pero no aparece informacion del celu.


ayuda pliss!

[adrianon]

necesitas finalizarlo con far subele el custom pack de otro modo jamas encendera
si no sabes como revisa la seccion de tutoriales busca el tuto para flashear cid 49 db 2010