Actualizaciones de Se Tool Box

[ADDIER]

v0.914014/UNI

- added .vkp processing for cid52 flashpatch
- if anybody experienced problem "bypass archive not found" it must be ok now
- bug on ufs interface with cid52 flashpatch fixed (if anybody using it )


*******

v0.914015/UNI

Code:
- from now after first stage of cid52 security bypass
user required to press "ready" to continue
(will greatly helps when doing many phones at once, suggested by AlexG)

- "can't get packet props" after flashing should be fixed now
(still unsure, cause can't repeat it 100% on mine phones,
thx to vasilius for GREAT help during bug investigating)

- some minor bugfixes (yes, Arash, pda+ufs will be good now )

hopefully next version will bring us corrected j110/j120 flashing and unlock.
maybe even t250 will be supported (at least flashing/userlock reset)
well, if all be well, A2 unlock by logs will be enabled too.

ps.
are all setool2 users wrote "shit" on kukuruzer forum ?

********

uploaded fixed versions of flashfiles for j110/j120 - old flashfiles caused phone restart after some time.

i read on forum many messages like "bug in 015, can't connect PDA phone"
mans, are you blind ? can't read ? mentally ill, like miserable kukuruzer team ?
it is clearly written :

Code:
please select any COM port as interface
so JUST DO IT - select ANY com port as interface,press desired operation and connect phone to cable.

[ADDIER]

updated script version for cid49/51->cid52 db2020 conversion.

following TACs (first 6-digits of IMEI) supported:

35170701
35170801
35170901
35171001
35194101
35194201
35194301
35220601
35220701
35220801
35240101
35282601
35283601
35283701
35306501
35306601
35342701
35381301
35399601
35457901
35462501
35462601
35463701
35463801
35463901
35464801
35464901
35471601
35489301
35489401
35491101
35536301
35570401
35578501
35601901
35665701
35665801
35715401
35731501
35851601

[ADDIER]

v0.914016/UNI

- added correct network unlock via patch for j110/j120 phones 
  (hehe, world first as far as i know ;) )

  howto: 
   select phone model and press unlock. 
   power on phone, press <**<, enter any code.

  if yours firmware unsupported for patch  - you have two options 
  - read fullflash (start 0 len 3F0000), upload it to rapidshare and PM me link
  - flash any firmware from support and do unlock

- ultrafast and ultrasafe userlock reset added for j1x0,k2x0 phones 
  (select model, press unlock)
- there is two new files in script folder
   j1x0_total_reset.arm - flash it to TOTALLY reset j110/j120 phone
   k2x0_total_reset.arm - flash it to TOTALLY reset k200/k220 phone
   (calltime,usercode,pictures,settings,etc is reset)

- slight cosmetic changes that were requested by arash.

ps.
i will not do "unauthorized phone" repair and other eeprom errors for
j110/j120 - for that use other tools - they deserving own peace of bread ;)

[ADDIER]

v0.914018/UNI

- fixed db2020 emptyboard filling (5 locks after emptyboard fill) bug. 
  Great sorry for that.
- many internal rebuilds to reduce memory consumption,etc.
  so be ready for bugs.
- minor bugfixes

  ah yes, almost forgot -
- added pnx5230 cid51 unlock by patch, change IMEI,
  crossflashing, complete filesystem support.  

  both dcu60 and com/ufs are supported, while i STRONGLY recommend DCU60

  ( that is NOT "gti" method, if someone want to start blabling. 
   Instead,i'm sure that all "developers" will use my way 
   and loaders patched by me from that release ;) )
  
  method requires 1 credit.

  usage very same as CID49/CID50/CID51 db2012/db2020:

  - check "use server", "alternative security bypass" 
   (that is mandatory), then
  - if want to change IMEI - check 
        "unlock after flash",
        "patch otp<>gdfs check in firmware",
        "allow to change IMEI when unlocking"
  - if want to unlock - check  "unlock after flash"

  note!. 
  when you using com, z310 phone can "stall" on restart phase.
  in that case, remove battery for 3-5 seconds, then insert it back.

rest files are uploaded on support area, in original rest files folder.

[ADDIER]

v0.914019/UNI

- A2 gdfs readout was incorrect from the beginning. fixed. thx,arash.
- pair of cosmetic fixes.

finally - z310 rest files
http://www.topsony.com/forum_es/local_links.php?catid=932&linkid=15451



********

v0.914020/UNI

- sometimes setool2 hangs on "Starting up..." session. fixed.
thx to arash for reporting and hard testing.

- for fun added "phone branding" readout in identify.

update only (replace old exe starting from 018 version with new)
Downloads - Se Tool - v0.914019_to_v0.914020 - Top Sony



*************


while kukuruzer trying to make pda flashing (hehe, with such temp they will make it in next summer - need i say,that setool2 users were first to enjoy pda flashing from 18-12-2006 ) and tells shits for our beloved setool2, we are working:

r8ba024 firmware updated for s500 phone, uploaded for k550 phone, and started to appear for k610 phone.

gogogogo, "lead programmer", steal 'em all make your "lead"


************

*v0.914021/UNI*

- added *full a2 unlock via server.*

usage is extremly same as with cid52 db2012/cid2 pnx5230/cid53 P1:
select phone model
on options, check "use server","do full unlock"
enter yours username/password
back to a2 tab
press unlock
request placed in queue, wait some time (up to 72 hours), retry.
follow program instructions (power on phone, install modem drivers,etc)

- misc bugfixes
:Downloads - Se Tool - v0.914020_to_v0.914021 - Top Sony
ps.
thx to arash for logo.

[ADDIER]

v0.914024/UNI

- added support for flash,usercode reset,gdfs and file operations
for cid53 pnx5230 phones (z555,w380 at present).
full unlock is possible via signature calculations
(only when signature calculcations are online)

- misc bugfixes, cosmetic mostly

- as usual, that it beta, so check for bugs and report them.

update eligible for 020 version ONLY, just unrar archive from distributive and
point updater to that directory.

Downloads - Se Tool - v0.914020_to_v0.914024 - Top Sony
z555,w380 r9ba023 firmwares uploading on support area.

[MaxDamage]

well, you wanted new firmwares ? you got them.

Code:
S500 R8BE001 firmware,fsimage,customizations uploaded
K630 R1EA030 firmware and few fsimages uploaded
K850 R1EA031 firmware and few fsimages uploaded
W890 R1EA030 firmware and few fsimages uploaded
W910 R1EA030 firmware and few fsimages uploaded
Z750 R1EA030 firmware and few fsimages uploaded

now you say - omg,wtf, why there is only one-two fsimage for r1ea03x a2 firmwares?
well, that is what we allowed to have by big daddy.

but... here is surprise:

Code:
if you noticed, there is files for each r1ea03x firmware, i.e:
K630_r1ea030_LangPack

do you know what is it? hell yeah! that is all possible languages.
just write that file... right, as custpack ..
together with available fsimage and you will get A LOT of languages.

if you don't want all languages, open langpack with any wanted
archiver and simple delete not needed languages.
here is contents of langpacks:

Code:
K630_r1ea030_LangPack
ar az bs cs en fa fr hr hu pl ru sk sl sq sr tl

K850_r1ea031_LangPack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl he hr hu is it kk lt lv mk nl no pb pl pt
ro ru sk sl sq sr sv tl tr uk xl

W890_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha hr hu ig is it kk lt lv nl no pb pl pt
ro ru sk sl sq sr st sv tl tr uk xl yo zu

w910_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha he hr hu ig is it kk lt lv mk nl no pb
pl pt ro ru sk sl sq sr st sv tl tr uk xl yo zu

z750_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha he hr hu ig is it ja kk lt lv mk nl no
pb pl pt ro ru sk sl sq sr st sv tl tr uk xl yo
zu

ps.
not ask me what mean "xl,yo", etc means.
personal thanks to eerchy for k850 red firmware.
personal "fuckoff" to all other semc products (kukuruzer,etc)
which will (and they will,just believe me) use setool2 langpacks.


ps.
firmware upload just started, gently allow it to finish ...

[ADDIER]

recently i found one intresting article,here is excerpt from it:

Quote:
A MR3 sw for K200/K220

It’s the problem with “can’t store picture”
and “can’t power on” that is the main reason for this.
amazing, but that firmwares is on setool2 support now

for those who not understand:

Code:
r1ad001 (mr3) firmware for k200/k220 uploaded.

[ADDIER]

uploaded chinese,taiwan, hongkong r1ea031 k850 firmwares,
added some ready fsimages
uploaded chinese,taiwan r1ea030 w910 firmwares,
added some ready fsimages

[ADDIER]

recuerden,errores en setool, como errores de conexion, o programa se cierra solo, son bug de procesamiento, esto se debe solucionar con tiempo, solo desconectar y conectar de nuevo no, es problema de la box