Tengo un NoKia E5-00 muerto necesito ayuda

[jcabrerat]

Amigos, acabo de hacer el proceso de Flasheo con Phoenix Service Software 2012.36.001.48629 con el RM-634 bajado del link de unos post anteriores (elchiapas) y el resultado fue también un fracaso, aqui está el log que genero el programa Phoenix:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00000C35
BB Asic Index is: 00
EM Asic ID is: 00000C30
BB Asic Index is: 00
Public ID is: 127000107AA20344E69D7087C59FB4AB63796A42
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0050
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 869872 bytes
Update server loaded
Asic CMT: Start programming 197916 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product

Al final Sale una ventana nueva en windows XP donde dice lo siguiente:

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001c (-2078212068)

Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry.

Con dos botones de respuestas: una cancelar y la otra reintentar.



Mi pregunta es: ¿Hay algo que esta fallando y no logro conseguir la falla? Si he notado que en el proceso de flasheo cuando termina el 100% de instalación, el driver desaparece del administrador de dispositivo. Hay también hay un conteo regresivo que empieza por el 25 y después sale un mensaje diciendo "Quite el cable usb y lo conecta de nuevo", el driver se carga de nuevo, pero 3 segundos después desaparece y se pierde la conexión, al final el equipo nokia E5-00 no bootea, solo vibra un segundo, no enciende.



Si sirve de algo aquí está la imagen donde se muestra la información que esta debajo la batería del equipo.