Greetings.

lets make some tests.

1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.

2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )

3.
power off phone.

go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.

press unlock.

when prompted, detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )

DO NOT DETACH PHONE FROM CABLE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP


SETOOL2 SMARTCARD UPDATE REQUIRED, IF YOU STILL NOT DONE IT.

https://rapidshare.com/files/573768306/v1.1094.rar

please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method

deben de actualizar su scard para solo para usuarios que ya tenian activada su setool a las cerciones nuevas
actualizan y luego usan la vercion v1.1094
este es el audater que debe usar updater__FABICELL_GSM

es beta recuerden y solo con esa vercion.al actualizar no podran usar verciones anteriores de setool ok


bueno salio todo OK
r a
menú-> Preferencias-> Aplicaciones-> Desarrollo-> habilitar la depuración usb, lo revise.
instalar "drivers adb" (drivers \ adb_drivers \ x10_drivers)esperar a que instale todos los driver
apagar cell

setool
modelo...
seleccionan casillas 1.2.5
PDA modelo a usar x10a
\unlock repair
luego presioanar tecla atras conectar y esperar el proseso

REMOVE SIM CARD FROM PHONE
FULLY POWER ON PHONE
ENABLE "USB DEBUGGING" IN PHONE:
(MENU,SETTINGS,APPLICATIONS,DEVELOPMENT)
INSTALL ADB DRIVERS IF NEEDED

cuando salga esto solo enciendanlo
esperen que salga

GETTING ROOT ACCESS ...
PROCESSING ...
FINALIZING ...
Unlock DONE
Elapsed: 76 secs.

listo bye.