Ok amigos este es el identify con nero key:

Power OFF the phone, connect COM cable and press POWER short
Connected to COM2
Device identification...OK
Sending Preloader...OK
Starting GDFS service...
Identification failed: Failed to start GDFS service, code: 0x04
ChipB2010 Model:A1 IMEI:35422400-372xxxx CID:51 Domain:BROWN
OTP LOCKED:1 CID:29 PAF:1
Uploading logic DB2010:
Detecting flash type...OK
ID: 0x890D (Intel)
Chip: Intel Tyax 256 Mbit NOR (top boot)
Shutting down device...OK
Certificate selected by user: A1_DB2010_29_RED
Power OFF the phone, connect COM cable and press POWER short
Connected to COM2
Device identification...OK
Uploading logic DB2010:
Sending ResetLoader...OK
Authenticating with key KIDP96201233...OK
Serial:132F00xxxx Free:989 A1:50 A2:89 Other:0 Blocked:NO
Reseting to factory defaults...OK
Shutting down device...OK
Power OFF the phone, connect COM cable and press POWER short
Connected to COM2
Device identification...OK
Uploading logic DB2010:
Sending ProductionLoader...OK
Writing EROM...OK
Recompiling security area...
GDFS configuration not found in flash! Flashing required to finish recovery process
Using default GDFS configuration for model F500:
StartAddr:0x44F00000 BlockSize:0x20000 PhysBlocks:8 LogBlocks:7
Error unlocking security: ReadFile function failed (code: 995 / La operación de E/S se ha anulado debido a una salida de subproceso o a una petición de aplicación)
STOPPED [77sec]

Luego de esto le hise un identify con setool y me dio el sgte log:

CFG:000000000000
ChipID:8000,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0049
Speed:115200
FLASH ID: 890D
OTP LOCKED:1 CID:29 PAF:1 IMEI:354224003xxxxx CERT:BROWN
ACTIVE CID:49 COLOR:BROWN

Model (from GDFS):F500i
Brand:SFR
Language Package: VFE_2
CDA article: CDA102237/6
CDA version: R35A
Default article: cxc125879
Default version: R2AA003
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"354224003xxxxx"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

Elapsed: 27 secs.
Ahora que me aconsejan????. Le hago un flash con nero key????. Amigo disculpa pero setool en la version 1.09 que es la que uso si me dice que lo soporta. Gracias por todo y por su preciada ayuda. De veras ya no se que decirle al cliente.