Error al intentando parchear vkp w580

[agustiin-10]

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:24 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Nico\Escritorio\Agus\w580\W580i - R8BE001-Main-Generic-LA-RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:255 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
CID52 BYPASS PROCEDURE FINISHED

Elapsed:233 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:432 secs.

[MasterK850]

Tienes suficiente bateria?
Aplicaste el quick access?
En este paso ya solo es agregando el vkp recuerdalo, te digo porque veo esto writing C:\Documents and Settings\Nico\Escritorio\Agus\w580\W580i - R8BE001-Main-Generic-LA-RED52.mbn
osea que apenas vas a agregar el quick access? si es asi entonces solo marca la opcion de by pass security y la de quick access no, ademas pon tu quick access en el MISC FILES

[agustiin-10]

Tienes suficiente bateria?
Aplicaste el quick access?
En este paso ya solo es agregando el vkp recuerdalo, te digo porque veo esto writing C:\Documents and Settings\Nico\Escritorio\Agus\w580\W580i - R8BE001-Main-Generic-LA-RED52.mbn
osea que apenas vas a agregar el quick access? si es asi entonces solo marca la opcion de by pass security y la de quick access no, ademas pon tu quick access en el MISC FILES

Mira, yo agrego el main a add files, el quick patch a MISC files, y toco la opcion Bypass DB2020 security. Tambien tengo que poner la opcion Use quick accese patch?

[JiMmY]

Asi kmo le haces esta bien para poner el quick access para poner un parche kn el quick ya instalado ya seleccionas "use quick acces" suerte