W300i problem pantalla que flashea

[loskaos]

mi w300 dejo de funcionar , instale setool2 lite 1.1 , estoy tratando de arreglarlo y pues estoy algo confundido , se supone que tengo que salvar el GDFS....

aqui esta el log

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:356476xxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

Model:W300i
Brand:Generic
MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1123203
Default version: R9A036

Operator: 000-00

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R9A036_CXC1123260_GENERIC_JE"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed:5 secs.

Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35647601041416 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
can't open file "E:\Users\Juan\Downloads\phone\setool2lite_db2020\ rest\R9A036_CXC1123260_GENERIC_JE"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
wrong response, break.
failed, that is fatal
Elapsed:586 secs.

Agradezco de antemano cualquier ayuda , sugerencia..