Mi W300 queda en "please wait"

[wsacotto]

le he hecho de todo y aun no puedo solucionarlo...

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901166501 CERT:RED
FLASH CID:49 COLOR:RED
Can't read SCRC unit
Elapsed:5 secs.

--------

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !
CDA:CDA102499/96
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901166501 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1123260_GENERIC_JE
Restore from:R4EA031_CXC1123260_GENERIC_JE
can't open file "C:\Documents and Settings\Laura\Escritorio\SE\SeTool2\SeTool 2 Lite 1.11\rest\R4EA031_CXC1123260_GENERIC_JE"
writing C:\Documents and Settings\Laura\Escritorio\SE\flash\W300i_R9A036_MA IN_GENERIC_JE_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Laura\Escritorio\SE\flash\W300i_R9A036_FS _AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
Customize.xml (12118)
Phone detached
Elapsed:383 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901166501 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
can't open file "C:\Documents and Settings\Laura\Escritorio\SE\SeTool2\SeTool 2 Lite 1.11\rest\R9A036_CXC1123260_GENERIC_JE"
Starting to process VKP patch script: C:\Documents and Settings\Laura\Escritorio\SE\flash\W300_R9A036_rem ove_please_wait_problem.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45140000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:69 secs.