ayuda W300

[zhapo]

tengo un problema con mi w300 segun yo es la gdfs
pero quiero estar seguro.
este es un log del setool

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
Can't load ID loader !
Elapsed:19 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
Can't load ID loader !
Elapsed:21 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102499/98
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

loader header not accepted
Elapsed:29 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
HDR block not accepted,error:AA
prepare failed,that is FATAL
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

loader prologue not accepted
Elapsed:199 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.

espero que puedan ayudarme
ya lo intente flashear muchas veces
y batallo mucho para que me lo detecte el programa
y cuado lo detecta y estoy en la parte de presionar READY
ai no me lo vuelve a detecta
gracias.