COMO PUEDO REPARAR EL PURO FS DE UN W300

[nachoone]

Haslo con el setool y hasle 1 full flash con main fs y cda dale, saludos

[TIBURONSIN]

jeje! hola de nuevo. Segui tu consejo. Pero no funcono asta incluso le cambie el cristal completito y nada lo flashe como me dijiste y no. Ahora lo hice con la setool box y nada de nada. TE DEJO LA LECTURA DE MI CEL CON SETOOL 2 LITE V1.8:welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401054519 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:CENT_EUROPE
CDA article: CDA102665/2
CDA version: R2A
Default article: cxc1123203
Default version: R9A036

Operator: 000-00

USERCODE:0000

Elapsed:9 secs.

PERO ESTA ES CUANDO SE DETIENE EN EL ARCHIVO 27 DEL FS:
:a109::a109:
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401054519 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:CENT_EUROPE
CDA article: CDA102665/2
CDA version: R2A
Default article: cxc1123203
Default version: R9A036

Operator: 000-00

USERCODE:0000

Elapsed:9 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102499/98
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:29 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401054519 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\Administrador.CASA-3C5580189F\Mis documentos\CELULARES 2\CELULARES\SONY ERICSSON\FIRMAS RESET Y GDFS\W300\R4EA031_49\W300_R4EA031_MAIN_GENERIC_JE_ RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Administrador.CASA-3C5580189F\Mis documentos\CELULARES 2\CELULARES\SONY ERICSSON\FIRMAS RESET Y GDFS\W300\R4EA031_49\W300_R4EA031_FS_AMERICA_2_RED 49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:161
Will flash 161 blocks...
llbug: can't get all data, got:0 expected:5641
verify block error
last blk:459A0000,00010000
Elapsed:345 secs.
espero me puedas ayudar¡¡ ¡¡¡saludos¡¡