w580 cant find simlock check

[kokego]

Hola estimados miembros,tengo este cell que no quiere liberarse. Alguien que me de una ayudita por favor.Lo estoy haciendo con puerto COM porque por Usb no me lo detecta. Aqui les dejo el Log.


v0.915040/UNI
CARD SERIAL: 000XXXXX
Loaded 51 flash descriptors
CFG:00000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package: EUROPE_1
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002
PROVIDER: MULTIPLE
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 6 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:10100000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

INSERT SIM CARD, FULLY TURN PHONE ON
GO TO GAMES MENU AND RUN EXECUTOR
AFTER PHONE TURNS OFF OR HANGS
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"

ChipID:9900,EMP protocol:0301
Speed:921600
Starting embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
FOUND VERSION "R6BC002_CXC1123362_GENERIC_LA"
USERCODE RESET TO "0000"
Searching...
Can't find SIMLOCK check
Unlock FAILED
Elapsed: 190 secs.

[Ivan08v]

Flashea el Main y reitera el proceso

Un saludo

[Physico]

Hola estimados miembros,tengo este cell que no quiere liberarse. Alguien que me de una ayudita por favor.Lo estoy haciendo con puerto COM porque por Usb no me lo detecta. Aqui les dejo el Log.


v0.915040/UNI
CARD SERIAL: 000XXXXX
Loaded 51 flash descriptors
CFG:00000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package: EUROPE_1
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002
PROVIDER: MULTIPLE
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 6 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:10100000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

INSERT SIM CARD, FULLY TURN PHONE ON
GO TO GAMES MENU AND RUN EXECUTOR
AFTER PHONE TURNS OFF OR HANGS
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"

ChipID:9900,EMP protocol:0301
Speed:921600
Starting embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
FOUND VERSION "R6BC002_CXC1123362_GENERIC_LA"
USERCODE RESET TO "0000"
Searching...
Can't find SIMLOCK check
Unlock FAILEDaa14
Elapsed: 190 secs.

TU REST NO ESTA presente por esto la box no puede sacar el o realizar el parche de tu firmware o tus res paquet estan incompletos revisa antes que aparesca rest ´presente si no no podra liberar nunca.

[jotademanu]

para eso agrega el main d ese telefono, y le das identify, para generarlo