[RESUELTO] W580 se desconecta durante flasheo

[Luis Gonzá]

Hola a todos¡ Tengo un W580 que pretendo flashear, el equipo me llego sin prender, la box lo detecta, pero al momento del flasheo (usb) se desconecta, siempre en distintos blocks, y por RJ45 ni siquiera lo dectecta, posteo el log de operaciones, ojala que pudieran ayudar, gracias anticipadas ¡¡
Saludos ¡¡
Posdata: bateria al 100%, block de carga limpio.

 v0.915044/UNI
CARD SERIAL: 0002XXXX
Loaded 51 flash descriptors
CFG:00000000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
FLASH ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
 
Model (from GDFS):W580i
Brand:TELCEL GSM
MAPP CXC article: R6BC002     prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package: AMERICA_1
CDA article: CDA102774/132
CDA version: R1A
Default article: cxc1123364
Default version: R6BC002
PROVIDER: 334-02
Network LOCKED
 
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
 
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE
 
SECURITY UNITS BACKUP CREATED.
Elapsed: 9 secs.
SIGNED MODE (USING SERVER)
CFG:10001000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID check:897E
Flash props sent ok
writing "D:\B\trabajo 2\Flash Files\S.E. w 580 CID 52\R8BE001_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
PROCEDURE WAS STOPPED BY USER
packet not acknowledged (10)
incorrect address [44840000/00010000]
Elapsed: 94 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID check:897E
Flash props sent ok
writing "D:\B\trabajo 2\Flash Files\S.E. w 580 CID 52\R6BC002_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
PROCEDURE WAS STOPPED BY USER
can't get packet start.
verify block error 00/6F, [444B0000/00010000]
Elapsed: 73 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID check:897E
Flash props sent ok
writing "D:\B\trabajo 2\Flash Files\S.E. w 580 CID 52\R6BC002_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
PROCEDURE WAS STOPPED BY USER
packet not acknowledged (10)
incorrect address [45740000/00010000]
Elapsed: 238 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
Unknown ChipID (3F00), RETRY
FAILED TO SETUP PHONE
Elapsed: 22 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
Unknown ChipID (3FFF), RETRY
FAILED TO SETUP PHONE
Elapsed: 21 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID check:897E
Flash props sent ok
writing "D:\B\trabajo 2\Flash Files\S.E. w 580 CID 52\R6BC002_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
packet not acknowledged (01)
subblock 017 NAK, [44430000/00010000]
Elapsed: 80 secs.
SIGNED MODE (USING SERVER)
CFG:10000000000000
ChipID:9900,EMP protocol:0301
 
PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35XXXXXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID check:897E
Flash props sent ok
writing "D:\B\trabajo 2\Flash Files\S.E. w 580 CID 52\R6BC002_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
packet not acknowledged (10)
incorrect address [448B0000/00010000]
Elapsed: 213 secs.

[AnsemHk]

Checa que tengas bien instalados los Drivers
Asi como el FASTPORT Limpio y que no le Falte algun PIN

Haz intentado en otro Puerto USB u otro PC ?

Tienes que checar todo bien

[Leftha]

Intenta flashear con otros FIRM , flashea por separado MAIN luego FS , Usa signed mode y Complet after flash .

Si el error perciste , sera FLAHS IC este danado . Mete algo de calor y trata de nuevo ....

Saludos

[jetboy93]

hola, dudo que sea flash ic. ya que el proceso se detiene en distintos blocks, pero podrías intentar eso que te dicen, flashear main, fs y despues finalizar el teléfono

[Luis Gonzá]

Hola, ya intente con diferentes flash, pero no termina ni siquiera uno. Intentare meterle calor y pruebo de nuevo, posteo resultados.

Saludos ¡¡

Les comento, le di un poco de calor al chip IC y ya se logro flashear. Cierro tema.
Gracias a todos ¡¡
Saludos ¡¡