No logro flashear w810

[Miguelo_12]

con el otro w810 no pasa ningun error pero este si, es decir, no estoy dentro de lo entendido ningun error porque voy haciendo todo por la regla el problema es el telefono que o tiene problema con el payload o el prologe, entre otros ya mencionados. Eh flasheado otro aparatos aki mismo sin ningun problema el unico que me a dao brega es este

ok TAKSHI lo intentare de nuevo

donde consigo los drives que dices?
mandame un link si puedes

te doy las cracarteristicas mas basicas para flashear un celulr de esos:
necesitastu pila al 100% cargado
un cable usb que no este roto por dentro
el fat port limipio basta con que le quite el polvo a los pines!!
si no entra con "C" metele con 2+5 o 1+7(raras veces funciona)
si no funciona es porque entonces:
no intalaste bien los drivers con vista esto se debe a que:
los arhivos que bajaste estan dañados!
te recomiendo que bajes el setool 1.08 con los drivers de gordon gate y lo flashees con ese mismo setool

ya encontre los drivers que dices en la carpeta del setools pero el problema periste mira

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102555/16
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
Can't load id loader !
Elapsed:18 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233601433701 CERT:RED
FLASH CID:49 COLOR:RED
Elapsed:19 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:17 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:30 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:39 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233601433701 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
ldr_on_ldr hdr no ack,err:10
can't load loader
Elapsed:38 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233601433701 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
Elapsed:33 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233601433701 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
ldr_on_ldr hdr no ack,err:10
can't load loader
Elapsed:17 secs.